Assembling rear callipers
Discussion
Having a few snags putting rear callipers back together I have the wind back tool for the job and have removed to the pistons and checked them and fitted new seals. Problem is they seem to get tight when wound about half way in and the bleed nipple is out so it’s not pressure any idea or is there a procedure for assembly for these?
(My father is doing the job as he is a mechanical engineer and now works hydraulics overhauling cylinders ect and doing it at his work, he has never came across callipers like this before. He has asked his boss who has been involved in the automotive industry for a number of years and is unsure also)
Help
Scotty

(My father is doing the job as he is a mechanical engineer and now works hydraulics overhauling cylinders ect and doing it at his work, he has never came across callipers like this before. He has asked his boss who has been involved in the automotive industry for a number of years and is unsure also)
Help
Scotty

Can't remember TBH, IIRC I lubricated it, worked it in, then kept pulling the h'brake lever so it was fully out before inserting the piston. I kept doing it on the bench whilst I was working on the rest of the wishbones / uprights... just to make sure it was good & freed 
Main thing is yank the lever till the thread doesn't turn anymore, don't insert the piston before that point. Then just wind the piston in, and wind it out operating the lever so its all nice & free..

Main thing is yank the lever till the thread doesn't turn anymore, don't insert the piston before that point. Then just wind the piston in, and wind it out operating the lever so its all nice & free..
Cheers Spend, that is clear now just go and inform the old father and get him told
We had a deal I do his wiring on his boat and he overhauled my callipers and paints them he is mechanical I am electronics/electrical Engineer so its swings and roundabouts

We had a deal I do his wiring on his boat and he overhauled my callipers and paints them he is mechanical I am electronics/electrical Engineer so its swings and roundabouts

Edited by scotty_d on Monday 9th February 23:02
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



