rocker cover removal
rocker cover removal
Author
Discussion

slideways

Original Poster:

4,101 posts

252 months

Friday 13th February 2009
quotequote all
can anyone tell me who would stock the correct socket for the rocker cover bolts
Ta
Rich

V8 Animal

6,015 posts

241 months

Friday 13th February 2009
quotequote all
Halfords i think it's a 12 star got one myself from them £4

scotty_d

6,795 posts

225 months

Friday 13th February 2009
quotequote all
yes +1

slideways

Original Poster:

4,101 posts

252 months

Friday 13th February 2009
quotequote all
i rang them the said no
is it a spline socket or 12 side hex

scotty_d

6,795 posts

225 months

Friday 13th February 2009
quotequote all
This is the ones i used worked great



GreenV8S

31,027 posts

315 months

Friday 13th February 2009
quotequote all
They're spline sockets but if they are in good condition and not too tight you can often get them undone with a hex socket.

slideways

Original Poster:

4,101 posts

252 months

Friday 13th February 2009
quotequote all
thanks guys i cant get splines for love nor money so long reach 12 sided it will have to be
Ta
Rich

steve-V8s

2,924 posts

279 months

Friday 13th February 2009
quotequote all
Got mine out with a slightly too big socket tapped into place with a piece of masking tape over the bolt head to take up the slack. The horrible spine things are in the bin, Socket caps are going on in their place.

glow worm

7,524 posts

258 months

Friday 13th February 2009
quotequote all
I think its called a Bi-Hex. Must say I've replaced all of mine with stainless steel alen keys ones.

4535jacks

91 posts

224 months

Friday 13th February 2009
quotequote all
You need an 8mm 3/4" drive bi-hex socket. Halfords do stock them but I got mine from an ordinary tool shop as it was cheaper

That Daddy

19,464 posts

252 months

Friday 13th February 2009
quotequote all
4535jacks said:
You need an 8mm 3/4" drive bi-hex socket. Halfords do stock them but I got mine from an ordinary tool shop as it was cheaper
Spot on wink

locodude

510 posts

226 months

Friday 13th February 2009
quotequote all
4535jacks said:
You need an 8mm 3/4" drive bi-hex socket. Halfords do stock them but I got mine from an ordinary tool shop as it was cheaper
3/4" drive? I think you mean 3/8" drive.

glow worm

7,524 posts

258 months

Friday 13th February 2009
quotequote all
I think you'll find you need a long 8mm 1/4" bi-hex socket with an extension...and it's still a pig to get at the inner ones at the rear. You'll find it easier with the Plenum off and air pipe disconnected.

Edited by glow worm on Saturday 14th February 10:12