removing the cigar lighter
removing the cigar lighter
Author
Discussion

symphonysid

Original Poster:

59 posts

242 months

Sunday 15th February 2009
quotequote all
i want to replace the cigar lighter on my 2000 chim - it's never been used and has rusted on the inside, but now i have a sat nav i need to use it ;-) I've been able to clean off some of the rust to get a contact, but it's still a bit dodgy.

i've tried to gently prise it out but it's proving to be a bit stubborn - before i start applying more pressure or consider removing the door trim to investigate further (really hope I don't have to do that!), can anyone tell me how it 'should' come out ?

cheers!

V8 Animal

6,015 posts

241 months

Sunday 15th February 2009
quotequote all
No great shakes removing the door card.
It's a tight fit so can't see how you can replace or clean it without removing the card.
I replaced my lighter dodgy electrics got mine from clever trevor did split the plastic green light surround refitting it as it's that tight.
Might think about reaming some fiberglass out if fitting a new one.

symphonysid

Original Poster:

59 posts

242 months

Sunday 15th February 2009
quotequote all
cheers - so once you have the card out, did you push out the old one from the underside?

V8 Animal

6,015 posts

241 months

Sunday 15th February 2009
quotequote all
symphonysid said:
cheers - so once you have the card out, did you push out the old one from the underside?
Yepyes

symphonysid

Original Poster:

59 posts

242 months

Sunday 15th February 2009
quotequote all
V8 Animal said:
symphonysid said:
cheers - so once you have the card out, did you push out the old one from the underside?
Yepyes
thanks :-)


bigdods

7,175 posts

258 months

Sunday 15th February 2009
quotequote all
Mine was removed, fixed and refitted by a mechanic with thin arms and small hands via the speaker hole. He may have picked up a few scratches during the process.....

Probably easier to remove the door card.

If you stick your arm in through the speaker hole make sure you disconnect the battery first.