Underneath the Arches
Discussion
Just completed changing the Discs and pads all round as it was a nice weekend weather wise and I have been waiting for a couple of months. I also took the opportunity to tidy up under the arches and give the outriggers a good clear out and spray whilst the wheels were off. The only good way to do this.
The good news is that all of the outriggers and areas I could see and cleaned e still had unblemished white powder coat. I know you cant see all of the chassis but what I could see gave me a lot of confidence. So a quick spray of WD40 on the corners to get at places waxoyl cant especially on top of the corner flat strengthening brackets and finished with a spray of waxoyl and it all looks good.
I noticed that the black surface on the inside of the wheel arches could do with a clean and paint.
What would be a good product to do this with. It looks like the original coating but what is it.
Trev
The good news is that all of the outriggers and areas I could see and cleaned e still had unblemished white powder coat. I know you cant see all of the chassis but what I could see gave me a lot of confidence. So a quick spray of WD40 on the corners to get at places waxoyl cant especially on top of the corner flat strengthening brackets and finished with a spray of waxoyl and it all looks good.
I noticed that the black surface on the inside of the wheel arches could do with a clean and paint.
What would be a good product to do this with. It looks like the original coating but what is it.
Trev
Gassing Station | Chimaera | Top of Page | What's New | My Stuff





not that im jealous at all



