Rev counter question
Rev counter question
Author
Discussion

ph1l5

Original Poster:

5,027 posts

233 months

Monday 23rd February 2009
quotequote all
Just a quick one, My car 400 never seems to be able to make it to 5000 RPM not due to lack of power rather I just run out of road to get it up that high. so was wandering if my rev counter is giving me the right readings. The cam was replaced 20,000 miles ago

on the motorway at a brisk speed it sits at 2000 RPM but nothing sounds like its screaming for mercy, I am not using much oil, although A lot of fuel 100 miles or so on a tank. So that got me thinking maybe my rev counter is not that accurate.
Anyone have any thoughts ???

V8 Animal

6,015 posts

241 months

Monday 23rd February 2009
quotequote all
What does it idle at?
At fast speeds should be at least 3k
Does sound faulty to me.

spend

12,581 posts

282 months

Monday 23rd February 2009
quotequote all
Spin it up in low gear and see where the rev limiter kicks in, could be set anywhere from 5750-6500 depending on chip?

Tell us which gearbox you have, and someone will give you ave rpm/mph for given gear which is a reasonable guide.

ph1l5

Original Poster:

5,027 posts

233 months

Monday 23rd February 2009
quotequote all
V8 Animal said:
What does it idle at?
At fast speeds should be at least 3k
Does sound faulty to me.
It idles at 1000 RPM. deffo wasn't reading 3000 at 100+ leptons

ph1l5

Original Poster:

5,027 posts

233 months

Monday 23rd February 2009
quotequote all
spend said:
Spin it up in low gear and see where the rev limiter kicks in, could be set anywhere from 5750-6500 depending on chip?

Tell us which gearbox you have, and someone will give you ave rpm/mph for given gear which is a reasonable guide.
Not sure on the Gearbox but its a 94 car ?

jdl1981

299 posts

214 months

Monday 23rd February 2009
quotequote all
my 400 sits at roughly an indicated 3000 rpm at 75-80. And pulls round to just over an indicated 6000rpm without much fuss.

ph1l5

Original Poster:

5,027 posts

233 months

Monday 23rd February 2009
quotequote all
jdl1981 said:
my 400 sits at roughly an indicated 3000 rpm at 75-80. And pulls round to just over an indicated 6000rpm without much fuss.
Hm me thinks I have a faulty rev counter, is there anyone that services, or can calibrate them ?

Edited by ph1l5 on Monday 23 February 12:14

spend

12,581 posts

282 months

Monday 23rd February 2009
quotequote all
94 car will have ETB gauges, best to send it back to ETB.
http://www.etbinstruments.com/

ph1l5

Original Poster:

5,027 posts

233 months

Monday 23rd February 2009
quotequote all
Nice one, around £30 + vat and will take a week.

schmokin1

1,223 posts

243 months

Monday 23rd February 2009
quotequote all
blimey, ETB replied to you? I wanted my speedo sorted and they didn't even reply to my email enquiry, I ended up doing it myself!

ph1l5

Original Poster:

5,027 posts

233 months

Monday 23rd February 2009
quotequote all
schmokin1 said:
blimey, ETB replied to you? I wanted my speedo sorted and they didn't even reply to my email enquiry, I ended up doing it myself!
Er I just phoned them, none of this waiting for an email for me.

V8 Animal

6,015 posts

241 months

Monday 23rd February 2009
quotequote all
ph1l5 said:
schmokin1 said:
blimey, ETB replied to you? I wanted my speedo sorted and they didn't even reply to my email enquiry, I ended up doing it myself!
Er I just phoned them, none of this waiting for an email for me.
Blimey old school tatics you was going to say you were about to get a biro out.laugh

scotty_d

6,795 posts

225 months

Monday 23rd February 2009
quotequote all
100 miles to a tank sounds very bad mine was overfueling and doing 150 to a tank that made me cry. mine had the wrong fuel pump relay fitted as it needs a 5 pin not 4 like was in mine so the lamda's did not get the 12v feed. i bought it like this i do not know how the previous owner did not clock this lol, worth a look