Headlight Adjustment
Headlight Adjustment
Author
Discussion

davers_uk

Original Poster:

22 posts

214 months

Tuesday 24th February 2009
quotequote all
I am having difficulty in removing the front trims from my 99 Chimaera to access the adjustment screws for the headlight unit. I see in the bible they talk about two 10 mm nuts that hold t on but I cannot find how to access them. Any tips as I cant use her at night at the moment.

Cider Andy

1,889 posts

256 months

Tuesday 24th February 2009
quotequote all
Remove the number plate for easier access through the front opening. You might struggle if you have arms like Popeye!

There are two 10mm studs in the bezel that will probably have wingnuts on them. They might be rusted up. The top of the bezel is held with Sikaflex or similar.

davers_uk

Original Poster:

22 posts

214 months

Tuesday 24th February 2009
quotequote all
Thats great. I have found them and can get my arms to them ! Thank you.

SwanJack

1,958 posts

303 months

Tuesday 24th February 2009
quotequote all
If your lucky the adjusting screws wont be rusted up. If they are, what turns into a 10 min job turns into a ******* nightmare.

nawarne

3,181 posts

291 months

Tuesday 24th February 2009
quotequote all
SwanJack said:
If your lucky the adjusting screws wont be rusted up. If they are, what turns into a 10 min job turns into a ******* nightmare.
On my '98 car, I had 3 off adjusters.
Access is helped via the panels in the wheel arch - you can get access to the wing nuts on the adjusters at least.

The adjusters can be bought individually from Clevor Trevor.

To get to the screws at the front of the reflector, you will need to remove a bit of the sikaflex in line with the screws and reseal when done.

Nick

SwanJack

1,958 posts

303 months

Tuesday 24th February 2009
quotequote all
You can actually buy all the adjusting bits, apart from the pins that attach the headlight to the adjusting screw, in B&Q.