Passenger door popping open - eek!!
Passenger door popping open - eek!!
Author
Discussion

SteveW8975

Original Poster:

6,389 posts

215 months

Tuesday 24th February 2009
quotequote all
I thought I had sorted the problem with the door not closing properly, but this morning it's been playing up again - to the extent that it swung open on a mini-roundabout. Bit of a underpants moment, but no damage done thankfully.

The top of the door needs a bit of shove to get it fully closed - or at least flush with the rear flanks, but it still opens to the first catch point if I hit a bump or even a heavily painted white line. If the green light is on the interior knob, it seems to keep it in place, but still on the first catch, so it rattles. If I have a passenger, they can keep a hand on it to make sure it don't swing fully open, but I'f I'm on my own in the car, it's a bit of a worry.

So - what are the common points to look at with Chimaera door locks? A guy at work "thinks" it may be the mechanism in the door frame, but I'm thinking it may be something more solenoid related, as it can pop open even when fully closed and flush.

Any ideas welcome.

bobfather

11,197 posts

286 months

Tuesday 24th February 2009
quotequote all
Do a PH search. This is common but there are several different things that can cause it so you need to review other people's stories then compare your symptoms.

Green Meanie

484 posts

249 months

Tuesday 24th February 2009
quotequote all
Hi
I had the same problem with the passenger door on my Griffith,removed the carpet at the rear of the door to get at the door lock mechanism all it needed was a clean and lubrication.It was just lack of use that caused the problem has been fine now for the past two years.

SteveW8975

Original Poster:

6,389 posts

215 months

Saturday 28th February 2009
quotequote all
OK, I've had a poke around with the lock mechanism, WD40, checked cables and all that, adjusted the striker plate on the door and it seems to be better - but still had one door swinging moment today.

Further poking around, I've found that there is a grey switch on the sill that seems ultra sensitive, I'm guessing this is a sensor for the lights and alarm, but when the door is open, I only need to tickle it and I can hear solenoids/accuaters clicking. On the door itself there is a bodge job of a screw that hits this switch when closed - on the drivers door it has a neat little rubber stopper to do the same job.

So - what effect does this switch have when the door lock is fully closed - to the second stop? When I close the passenger door properly to the second catch, there is a noticeable gap at the bottom where this screw is pushing against the switch - but if that jolts slightly when travelling, is that enough to open the lock in any way?

I've had a look at other threads on the matter, and tried what I can within my ability, without dismantling it completely, but I can't find any mention of the effect of this switch.



Edited by SteveW8975 on Saturday 28th February 18:01

SteveW8975

Original Poster:

6,389 posts

215 months

Friday 27th March 2009
quotequote all
Having a humour failure with this frikkin door now frown

After a few weeks of just the occasional pop open, this morning it popped fully open every few hundred yards. Of course this only started as I got onto the motorway, so had to drive 4 miles to the next junction, and about 14 miles back home leaning across to hold the frrikkin thing closed, swap cars, drive back to work, about an hour late.

The only way it will stay closed is if I drive like there is an egg balanced on the bonnet frown

Another good poke around tomorrow I think. Grrrr.


Ollyd

1,917 posts

250 months

Friday 27th March 2009
quotequote all
Sounds like you need to up the ante a bit on this!

If it was me I would tie the bloody thing shut (or disconnect the solenoid) and drive to the nearest TVR specialist ASAP.

Seriously, doors opening by themselves on the motorway is very quickly going to lead to a massive sense of humour failure by someone other that you: ie the Fuzz / the person you drive in to whilst holding the door shut / the person whose car the door hits on the next round about.

Hope it turns out to be a simple fix.

locodude

510 posts

226 months

Friday 27th March 2009
quotequote all
How far do you have to turn the interior door opener before it opens the door? It could be that the cable is a bit tight and is holding the catch 'almost open'. This is easy to adjust, it's a solderless nipple on the end of the cable. Same for the solenoid as well I believe. Just a thought.

SteveW8975

Original Poster:

6,389 posts

215 months

Friday 27th March 2009
quotequote all
locodude said:
How far do you have to turn the interior door opener before it opens the door? It could be that the cable is a bit tight and is holding the catch 'almost open'. This is easy to adjust, it's a solderless nipple on the end of the cable. Same for the solenoid as well I believe. Just a thought.
After much poking around this evening, I'm pretty certain it is the lock mechanism in the door frame, rather than the positioning of the catch on the door itself, or any cables.

With the door open, I can move the visible hooked part of the locking mechanism inwards, to both its first catch, and fully closed positoin. But even with the central locking light on, I can still open this hooked catch by literally just touching it - it seems to have no force holding it closed at all. The interior opener still moves freely when I look at the end of the cable going into the lock.

I can see a GM logo on the mechanism, so I'm guessing it will be off an Astra or Cavalier, and hopefully not difficult to source. It's booked in at Sportmotive for the outrigger replacement on 6th April, but I may have to bring that forward if my poking around skills don't improve this weekend.

Does Gaffer tape do any lasting damage to the paintwork...?!

MADMAX2

2,336 posts

225 months

Friday 27th March 2009
quotequote all
Still having problems Steve hmmm if you havnt got it sorted by next meriden meet ill have a look again



ian

steviegasgas

417 posts

216 months

Saturday 28th March 2009
quotequote all
My door does it if I havent returned the centre switch back to the middle, if I turn it to open the door and just leave the centre switch the door will not stay shut, so just turn it back to the middle and everything okay, maybe try that? Cheaper than a strip down....if it works!

captin slow

256 posts

214 months

Saturday 28th March 2009
quotequote all
take the door off you may get cold but great if you fancy robbing a bank!cop

MADMAX2

2,336 posts

225 months

Saturday 28th March 2009
quotequote all
captin slow said:
take the door off you may get cold but great if you fancy robbing a bank!cop
how about robbing some taps


whistle

SteveW8975

Original Poster:

6,389 posts

215 months

Sunday 29th March 2009
quotequote all
A combination of weather, catching up with accounts and doing geeky web stuff meant the car remained pretty much untouched today, except for swapping the wheels over to a set of 17" multi-spokes.

Removing the doors may be an option - try to get that Caterham/Westfield feel to the motor...?!

I'm doing a dawn patrol with a few mates ready for the start of the F1 season, so weather permitting I'll be taking a better look tomorrow afternoon. If anyones around the North Staffs area and fancies having a poke around it at as well, feel free. Chocolate and coffee in good supply.

SteveW8975

Original Poster:

6,389 posts

215 months

Monday 30th March 2009
quotequote all
About an hour of poking and swearing has helped it quite a bit - I've adjusted the position of the lock mechanism and the door catch, lubed all the lock mech and accessible cables again, and cleaned the door sensor switch in the sill.
There is a bit of knack to getting it closed properly, and it holds a lot better now - only swung open once as I pushed briskly around a right-hander, and popped to the first catch position a few times.

It will certainly make it more drivable until it goes into Sportmotive next Monday.

WOO5IE

968 posts

228 months

Monday 30th March 2009
quotequote all
As a temp measure could you not apply the central locking using the button in the middle of the knob on the centre console it may add some addtional locking. It might save trashing a door

Trev

CCM

3,521 posts

233 months

Monday 30th March 2009
quotequote all
or he could try attatching some string to it and holding it closed when he goes round corners hehe

MADMAX2

2,336 posts

225 months

Monday 30th March 2009
quotequote all
SteveW8975 said:
About an hour of poking and swearing has helped it quite a bit - I've adjusted the position of the lock mechanism and the door catch, lubed all the lock mech and accessible cables again, and cleaned the door sensor switch in the sill.
There is a bit of knack to getting it closed properly, and it holds a lot better now - only swung open once as I pushed briskly around a right-hander, and popped to the first catch position a few times.

It will certainly make it more drivable until it goes into Sportmotive next Monday.
ask them to convert to lambo gullwing doors they will look cool as they open round an island and you wont trash em

hehe



getmecoat

Edited by MADMAX2 on Monday 30th March 20:36

SteveW8975

Original Poster:

6,389 posts

215 months

Tuesday 31st March 2009
quotequote all

batman0404

90 posts

223 months

Wednesday 1st April 2009
quotequote all
Just (last week) had the same problem.
Car is under warranty and back at dealaers.
I'll post the outcome.

SteveW8975

Original Poster:

6,389 posts

215 months

Wednesday 1st April 2009
quotequote all
I "think" I may have it nailed!! (Not nailed shut!)

I'm not almost certain it is a faulty door switch in the sill that has been sending the door actuator a bit loopy. When the car is parked up, no ignition on, the door shuts fully, and no amount of nudging or shoving will open it. However, when I put my fingers in the gap at the the bottom of the door by the sill, I can hear the switch move and the actuator clicking with the slightest movement of the door panel.

I've removed the door switch, and it is corroded to buggery. It looks a basic/generic enough part, so I'm off to see if I can get one from Halfords or a local backstreet guy thats open all hours and try that out.