Heater fan not working – help!
Heater fan not working – help!
Author
Discussion

Benjaminpalma

Original Poster:

1,214 posts

213 months

Thursday 26th February 2009
quotequote all
I’ve checked the relevant fuse – it’s fine.

What’s the next move short of ripping out the dashboard?!

Is this a common happening?!?!

Thanks, peeps!

M@H

11,298 posts

303 months

Thursday 26th February 2009
quotequote all
Not that common no, what blower switch arrangement do you have..? smile

Cider Andy

1,889 posts

256 months

Thursday 26th February 2009
quotequote all
I'd check all the fuses: there were many different fusebox layouts over the years.

What year is the car? There are two different wiring systems for the heater fan. Earlier cars had a three-speed Vauxhall rotary switch achieving the different fan speeds via wirewound resistors. If one or other of the resistors have failed the fan may only work on full speed (this bypasses the resistors).

Later cars had an aluminium rotary switch incorporating a push button (akin to the volume control on a stereo system). This is connected to an electronic variable speed control. It's not unknown for one of the connectors to the speed control ECU to burn out. This is usually repairable.

Beyond that the fan motor may have seized, although that would probably melt the fuse. It's a Vauxhall Astra item (Mk. I, I think).

scotty_d

6,795 posts

225 months

Benjaminpalma

Original Poster:

1,214 posts

213 months

Thursday 26th February 2009
quotequote all
M@H said:
Not that common no, what blower switch arrangement do you have..? smile
One knob: Push-on-push-off with a twist to increase the fan speed.

scotty_d

6,795 posts

225 months

Thursday 26th February 2009
quotequote all
Bet it will be the pin burned out look at the pics in the link above.

Benjaminpalma

Original Poster:

1,214 posts

213 months

Thursday 26th February 2009
quotequote all
Cider Andy said:
I'd check all the fuses: there were many different fusebox layouts over the years.

What year is the car? There are two different wiring systems for the heater fan. Earlier cars had a three-speed Vauxhall rotary switch achieving the different fan speeds via wirewound resistors. If one or other of the resistors have failed the fan may only work on full speed (this bypasses the resistors).

Later cars had an aluminium rotary switch incorporating a push button (akin to the volume control on a stereo system). This is connected to an electronic variable speed control. It's not unknown for one of the connectors to the speed control ECU to burn out. This is usually repairable.

Beyond that the fan motor may have seized, although that would probably melt the fuse. It's a Vauxhall Astra item (Mk. I, I think).
Thanks. I looked at the plan in the owner's handbook-cum-filofax, and checked the fuse designated as 'heater' and it was okay, but I'll check the others. Is there such a thing as a car fuse puller, by the way?!?

It's a '99 car with a hi-fi type switch. Where's the speed control ECU?

M@H

11,298 posts

303 months

Thursday 26th February 2009
quotequote all
Benjaminpalma said:
It's a '99 car with a hi-fi type switch. Where's the speed control ECU?
Under the dash top. There is a bit of copper ribbon wire that connects the switch up to it. (can provide a pic tomorrow morning if needed) IT might just be that it has come off smile

Cheers,
Matt.

Edited by M@H on Thursday 26th February 15:11

Benjaminpalma

Original Poster:

1,214 posts

213 months

Thursday 26th February 2009
quotequote all
scotty_d said:
Thanks. God I love this forum!!! Don't know why I couldn't find that myself, but both the forum and the car are new to me... The rest of the car is awesome. I keep it in Spain so with the spring around the corner heating is not an issue. But I may want the fan on to take some of the heat off if I get stuck in a traffic jam in summer...

Thanks, everyone else, by the way.

scotty_d

6,795 posts

225 months

Thursday 26th February 2009
quotequote all
you can get fuse pullers but better just to use long nose pliers as it is tight up in there as you know.

Here is a better link with more pics and how to fix

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

Edited by scotty_d on Thursday 26th February 15:18

M@H

11,298 posts

303 months

Thursday 26th February 2009
quotequote all
Benjaminpalma said:
But I may want the fan on to take some of the heat off if I get stuck in a traffic jam in summer...

Thanks, everyone else, by the way.
oooo nasty, if the engine is hot then the heater will bung out LOTS of hot air and you will not want to be sat in the car. Much better to check your otter switch etc is all ok and think of converting to (or adding in) a 12v waterpump - I wouldn't suggest it for a UK car but in spain it could well be a godsend. Ultimately when the car is idling in traffic the flow of coolant to the rad and back is failry stagnant and the only way to up it is by revving the car (not a good idea obviously), but if you add a high flow rate 12v pump into your coolant circuit you can get the water sprinting round to the rad and back and assuming your fans are on then you'll be onto a winner and a happy engine. The thought occurs you could use the otter switch close circuit to trigger the switching of a 12v waterpump then you won't overcool your engine ! smile

Cheers,
Matt.

Edite to add: oh and of course if you remove the mechanical waterpump you get more BHP at the wheels wink

Edited by M@H on Thursday 26th February 15:27