Dunlop sp9000 front tyre pressures.
Dunlop sp9000 front tyre pressures.
Author
Discussion

ads

Original Poster:

1,369 posts

288 months

Friday 27th February 2009
quotequote all
As the title says really.
I have done a search but couldn't find any answers.
I recently fitted 205/55 ZR15 Dunlop SP9000's on to the front of the chim.
I have been running them at 24psi, but when pushing the car hard round corners the front seems to wash-out wide. Am I running them too high pressures?

Anyone been running them and know what pressures to use?
I have them on the rear too at 26 psi but not had any problems with them so far.

Thanks in advance.
Ads

STE VR

501 posts

237 months

Friday 27th February 2009
quotequote all
I think its a case of trial and error. I found that 27psi with exactly the same size/type of tyres worked well for me. Are you measuring the pressure with the garage gauge or a proper one. I only ask because when I put 27psi in at the garage my accurate home one showed them to be 31psi !!!!

Steve

FlipFlopGriff

7,144 posts

278 months

Friday 27th February 2009
quotequote all
24 front works well for me (on both Griffs and 1 is a daily driver) as 2 psi higher than recommended for the original fit Bridgestones. Maybe geometry settings aren't correct and this is compounding the problem.
FFG

Edited by FlipFlopGriff on Friday 27th February 12:23

BBR

110 posts

230 months

Friday 27th February 2009
quotequote all
I can't check at mo but IIRC its 22psi front and 24psi rear. I know it sounds low, thats why I remember it.

bigdods

7,175 posts

258 months

Friday 27th February 2009
quotequote all
24 front works for me too - how new are they ? maybe not scrubbed in yet.

I think you should have a look at your geometry and anti roll bar links. WHen I had Rose jointed ARB links fitted it transofrmed the handling, then I had new suspension fitted and it got even better.

Unfortunately you cant really dial out these kind of problems by playing with the settings.

FWIW I tried the 9000's at 26 and it was like ice driving .......

MADMAX2

2,336 posts

225 months

Friday 27th February 2009
quotequote all
24psi is the norm


bow

ads

Original Poster:

1,369 posts

288 months

Friday 27th February 2009
quotequote all
Many thanks to everyone.

I am using my own proper pressure gauge. I never trust the garage ones, they are always wrong! smile

The tyres have only done probably 50 miles i guess. I will try them on 24psi for a bit longer and see how I go.
I'm running the standard suspension setup. I'll check my drop links. Geo should be ok, it was done in the last service, about 1000 miles ago, but probably worth getting it checked.

I'm running 26 psi on the back and they seem to be good, so we will see how 24 is on the front.

Cheers guys. smile

P.S bigdods, looks like yours is the same colour as mine! i like your choice wink


Edited by ads on Friday 27th February 19:21

900T-R

20,406 posts

288 months

Friday 27th February 2009
quotequote all
I'm running 1.8 bar/26 or so psi on the fronts - will try 24 but given the way it is now, I suspect it will make the front end a bit too squishy due to the soft sidewalls.

spend

12,581 posts

282 months

Friday 27th February 2009
quotequote all
Its more than likely they need a couple of heat cycles to cure /scrub them.. Easier said than done in current chilly weather...

bigdods

7,175 posts

258 months

Friday 27th February 2009
quotequote all
ads said:
Many thanks to everyone.

The tyres have only done probably 50 miles i guess.
I think you may have your answer. You'll need a few hundred and some decent heat cycles to scrub them in. I was told by someone in the know that a scrubbed in tyre surface will have a suede like finish, until you have that its all slip/slide....

ads said:
P.S bigdods, looks like yours is the same colour as mine! i like your choice wink
Blue ones are of course fastest hehe



Edited by bigdods on Friday 27th February 21:06


Edited by bigdods on Friday 27th February 21:06

ads

Original Poster:

1,369 posts

288 months

Tuesday 3rd March 2009
quotequote all
Thanks for the help guys.
Looking at the tyres they do look like they need scrubbing in. Hopefully they will get a bit better after that.

I will see how I get on when I have done a few more miles in them.