1st March = 1st run out of 2009
Discussion
Not really a discussion point, but I took the Chimaera out for it's first run of 2009 today and it was great to be behind the wheel again. The weather down our way has been awful for a while and the lane we live on hasn't really been passable for something so low. Anyway the recent dry period helped and I thought I would take advantage of the sunshine.
Hope to see some of you out over the spring and summer and happy motoring to all
Cheers
Rich
Hope to see some of you out over the spring and summer and happy motoring to all
Cheers
Rich
I too had a great run to the Central Scotland meet today “seen two very nice 09 plate Tuscans “ Any way the run home I heard a ping and thumb like something came off the car, a few miles down the road I found out what it was when I went to brake managed to pull over and found the front near side calliper was binding on took the wheel off and found it to be one off the Allen cap bolts was missing, opps I f
ked up when rebuilding the car and must have missed this. Lucky for me a nice chap who was carting with his daughter stopped to offer help and had tools and a bolt that fitted. It is not like me to miss things like this. Have learned a lesson one job at a time as i have done 101 jobs over the winter jumping between them and missed this. Will be spending tomorrow checking every nut and bolt.
ked up when rebuilding the car and must have missed this. Lucky for me a nice chap who was carting with his daughter stopped to offer help and had tools and a bolt that fitted. It is not like me to miss things like this. Have learned a lesson one job at a time as i have done 101 jobs over the winter jumping between them and missed this. Will be spending tomorrow checking every nut and bolt. scotty_d said:
I too had a great run to the Central Scotland meet today “seen two very nice 09 plate Tuscans “ Any way the run home I heard a ping and thumb like something came off the car, a few miles down the road I found out what it was when I went to brake managed to pull over and found the front near side calliper was binding on took the wheel off and found it to be one off the Allen cap bolts was missing, opps I f
ked up when rebuilding the car and must have missed this. Lucky for me a nice chap who was carting with his daughter stopped to offer help and had tools and a bolt that fitted. It is not like me to miss things like this. Have learned a lesson one job at a time as i have done 101 jobs over the winter jumping between them and missed this. Will be spending tomorrow checking every nut and bolt.
I had this happen on the Griff not that long ago. I never really found out what caused the bolt to undo - especially when you look at how long those bolts are - but I resolved I would never tighten up something with the intention of 'coming back to it later' and I'd always use a dab of loctite on the brake caliper bolts.
ked up when rebuilding the car and must have missed this. Lucky for me a nice chap who was carting with his daughter stopped to offer help and had tools and a bolt that fitted. It is not like me to miss things like this. Have learned a lesson one job at a time as i have done 101 jobs over the winter jumping between them and missed this. Will be spending tomorrow checking every nut and bolt. Glad to hear you're OK though. You live and learn eh.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



