Exhaust Mounting Rubbers / ACT Cherry Bomb
Exhaust Mounting Rubbers / ACT Cherry Bomb
Author
Discussion

S4CJO

Original Poster:

429 posts

290 months

Monday 2nd March 2009
quotequote all
Hi Just fitted the ACT Cherry Bomb and it's awesome woohoo car even feels smoother. However when I took the support plate off the chassis, the one which is held on with 6 x 17mm bolts the mountings though OK could do with changing (or thats me been picky). Anyway anyone out there know who supplies them?

Anybody want a std exhaust from 1998 450 Chim?




lewis_sharman

5,958 posts

222 months

Monday 2nd March 2009
quotequote all
if its the same as the exhaust from a 400 then i would definately be interested!

ETA YHM

Edited by lewis_sharman on Monday 2nd March 23:52

S4CJO

Original Poster:

429 posts

290 months

Tuesday 3rd March 2009
quotequote all
I belive the exhaust is std throughout the range. I'll drop you a mail.

Cheers

Clive

FlipFlopGriff

7,144 posts

278 months

Tuesday 3rd March 2009
quotequote all
The rubber bobbins (you'll need 3 male & 3 female) are a quid or so each and can be got from TVR Power or Clevor Trevor to name but a few. Easier to do with exhaust off, bugger with it on (unless you've got a 2/4 post lift).
FFG

S4CJO

Original Poster:

429 posts

290 months

Tuesday 3rd March 2009
quotequote all
Cheers Paul, I'll give them a try.

HRG

72,863 posts

270 months

Tuesday 3rd March 2009
quotequote all
I just got mine the other day... TVRCarParts definitely stock them yes

S4CJO

Original Poster:

429 posts

290 months

Tuesday 3rd March 2009
quotequote all
Hi Rob,

Just got order confirmation from the TVR Shop so something to do on Saturday morning thumbup. Phew for a minute decorating was looming whistle .

Cheers

Clive

hiltonig

3,153 posts

239 months

Tuesday 3rd March 2009
quotequote all
well that will be 2 of us with the ACT exhausts then, it does sound good without being overloud !! what you want next is the racing manifolds

S4CJO

Original Poster:

429 posts

290 months

Tuesday 3rd March 2009
quotequote all
Hi Nigel, what manifolds are you suggesting ???

hiltonig

3,153 posts

239 months

Wednesday 4th March 2009
quotequote all
I have the ACT racing manifolds with the racing cats, even these give a little in terms of performance and look so much better than the originals

Meatball

1,638 posts

241 months

Wednesday 4th March 2009
quotequote all
S4CJO said:
Hi Just fitted the ACT Cherry Bomb and it's awesome woohoo car even feels smoother. However when I took the support plate off the chassis, the one which is held on with 6 x 17mm bolts the mountings though OK could do with changing (or thats me been picky). Anyway anyone out there know who supplies them?

Anybody want a std exhaust from 1998 450 Chim?
Just being nosey
What is an ACT Cherry Bomb? is it the whole exhaust from the y piece back or cut and weld in new cherry bombs? and how much was it?
Cheers

450Nick

4,027 posts

243 months

Wednesday 4th March 2009
quotequote all
The ACT system is a full replacement in stainless steel from the y-piece all the way to the tail pipes. And it sounds lovely!

Price shown here: http://www.actproducts.co.uk/shop/index.php?main_p...

Edited by 450Nick on Wednesday 4th March 23:40

hiltonig

3,153 posts

239 months

Thursday 5th March 2009
quotequote all
yep I would agree with that as it sounds just right without being too over loud but I am running with racing cats

S4CJO

Original Poster:

429 posts

290 months

Monday 9th March 2009
quotequote all
Hi All,

Having had the system now on the car for a week we took it along to the TVR East Midlands meet where someone enquired about the system but noted the outlets appeared further under the valance than std. Having not really checked this apart from lying it side by side with the original where a visual glance gave a like for like appearance, we checked two other Chimaera and indeed the STD pipes do protrude between 25 – 30mm more. Only a slight difference between the two Chimaera which could be TVR build tolerances. I can only assume this difference is between the rear mounting locator on the rear of the silencers and the tip of the exhaust.

View of STD ex


Another slight difference was the distance between the rear outlets which on the original system is 690mm and the new one 670mm this can be seen looking at the rear of the car as the outlets are no longer central to the body moulding which on a Griff would not be an issue or is it me wanting perfection. I did check at different distances down the exhaust and the difference remained almost constant. I know mine is the later facelift model but would expect that the systems were the same dimensions on earlier models.

Rear shot of Chimaera



I've advised Tim at ACT and also written direct to JP along with photos and dimensions, though apart from the cosmetics it's awesome. May now need to consider the front section as a hiltonig mentioned.

Edited by S4CJO on Monday 9th March 17:56


Edited by S4CJO on Monday 9th March 18:04

hiltonig

3,153 posts

239 months

Monday 9th March 2009
quotequote all
Hello Clive , I have also noticed that mine too are further under the valance just like yours so this must have been noticed by them before ??? Yes you will like the manifolds hopefully it will be dry on the mini-meet. Did ACT offer to rectify the pipes ??

S4CJO

Original Poster:

429 posts

290 months

Monday 9th March 2009
quotequote all
Hi Nigel,

Sent all the info to Tim at ACT who did say he would pass the comments etc onto JP. I have however today sent a letter to JP along with photos and dimensions so I'll keep you posted. If you can make it on the 29th you can take a look.

hiltonig

3,153 posts

239 months

Monday 9th March 2009
quotequote all
one other thing I noticed tonight is that the exhaust tubes at the back are not as polished as the originals. That said the sound is too good to back to the original

S4CJO

Original Poster:

429 posts

290 months

Monday 9th March 2009
quotequote all
Yes the stainless is more satin than chrome.

FlipFlopGriff

7,144 posts

278 months

Tuesday 10th March 2009
quotequote all
I'm sure they'll polish up with some elbow grease. Keep meaning to get round to giving mine a clean up. low on the list though.
FFG