Fuse Board
Fuse Board
Author
Discussion

Kwacker

Original Poster:

641 posts

315 months

Tuesday 3rd March 2009
quotequote all
After the cars soaking it appears that the fuse board is... not well.

Does anyone know what car it originaly came from? I have heard Audi but which one.

Has anyone replaced a fuse board before?

Not looking forward to it!

Kwacker

steve-V8s

2,924 posts

279 months

Tuesday 3rd March 2009
quotequote all
May be best to post a picture of the board as several types were used.

spend

12,581 posts

282 months

Tuesday 3rd March 2009
quotequote all
There were only 2 types of fusebox used, the normal one and an odd different one for a short period. The main one was just wired several different ways on the same component.

I have had a couple of Audi boxes that 'appear' the same, but there are subtle differences. The std boxes are only available used, if you are prepared to convert to an alternative layout the VWP modular fuseboxes are a good alternative. If you don't source a second hand TVR unit, its a lot more work than just 'plugging it in' in fact a major project checking the existing wiring layout, checking the new box layout, then wiring it up (around 100 tracks!)

steve-V8s

2,924 posts

279 months

Tuesday 3rd March 2009
quotequote all
There seems to be more than two types shown in Steve's book, perhaps that was just for the Griff.

spend

12,581 posts

282 months

Tuesday 3rd March 2009
quotequote all
As I said that is how they are wired up.

We may all have the same fuseboxes in out houses - but they are unlikely to have the wires & fuses all connected identically wink

scotty_d

6,795 posts

225 months

Tuesday 3rd March 2009
quotequote all
Give you a chance to relocate to some where you can get at it.

Kwacker

Original Poster:

641 posts

315 months

Tuesday 3rd March 2009
quotequote all
I'll be happy when I can drive the car again. But I am planning on relocating the battery to the boot and putting the fuse board where the battery currently lives.

I will try and do some photo documentation.

Kwacker

The AJP Griff

4,360 posts

286 months

Tuesday 3rd March 2009
quotequote all
If you need a replacement fuseboard it might be worth contacting Clive Ford over on the Griff forum.I would be surprised if his wasn't coming up for sale soon as he's in the process of replacing his with the modular type from Vehicle wiring products.

Edited by The AJP Griff on Tuesday 3rd March 18:28