Central locking kit.
Discussion
Well here is a kit http://www.maplin.co.uk/Module.aspx?ModuleNo=12303 dont bre fooled by the price,i have fitted a few of these in as many years and they have run faultlessly(good quality components)cant help with the wiring but fitting is easy you just use the alarm central locking switching output to trigger the master shunts,a good alarm specialist could do all this for you for a sum
unless you fancy a go,me personally would feel happier with a CAT 1 alarm immobilizer fitted though,you have to get that fitted by a a registered installer to meet the CAT 1 specs 
unless you fancy a go,me personally would feel happier with a CAT 1 alarm immobilizer fitted though,you have to get that fitted by a a registered installer to meet the CAT 1 specs 
WTF does that do that is not already present on the car?
As I read it he asked for a remote control - he already has C/L from the key.
OP call Carl Baker he knows the different TVR factory installs / additions better than most
If you want to DIY its easy enough to reinstall complete alarm / immob yourself with care - but you still need it checked and stamped by pro for insurance purposes generally.

As I read it he asked for a remote control - he already has C/L from the key.
OP call Carl Baker he knows the different TVR factory installs / additions better than most
If you want to DIY its easy enough to reinstall complete alarm / immob yourself with care - but you still need it checked and stamped by pro for insurance purposes generally.spend said:
WTF does that do that is not already present on the car?
As I read it he asked for a remote control - he already has C/L from the key.
OP call Carl Baker he knows the different TVR factory installs / additions better than most
If you want to DIY its easy enough to reinstall complete alarm / immob yourself with care - but you still need it checked and stamped by pro for insurance purposes generally.
Misread the 1st post sorry darling Spend,must apologise most profusely,see i didnt think he had central locking fitted,still never mind kissy kissy 
As I read it he asked for a remote control - he already has C/L from the key.
OP call Carl Baker he knows the different TVR factory installs / additions better than most
If you want to DIY its easy enough to reinstall complete alarm / immob yourself with care - but you still need it checked and stamped by pro for insurance purposes generally.
oh yeah,WTF back to you too 
spend said:
Hmmm... using terms like 'darling' suggest that you may be yet another closet poo miner? You should join PhatDaddy and a buy a nice Toymota hairdresser's car in that case 
Now look whos f
king starting again
dont know about poo miners Spanker,but my foot slammed up your arse will give you a good insight,second thoughts you probably enjoy it,well done Pushrod someone else twisting Spankers melons
dont twist to hard he likes that kind of thing.Edited by That Daddy on Thursday 5th March 15:43
Hi Bubblehead,
Unless someone has remover the central locking in the past (can't think of a reason why they would ?) you will have it. Pretty sure all 90's TVR's did.
The locks themselves are actually located in the rear wing, not the door. The door just has a catch on the inside edge. Move the seat forward out of the way and there is an access point to the locks and solenoids on the inside (behind the carpet) at the same point the door catch meets the rear wing.
The solenoids operate the door locks and sometimes fail, but are easily replaced. Re-reading your posts again makes me wonder if you have the remote key fobs ? If you do are the batteries dead ? The fobs sometimes need to be synchronised with the alarm/immobiliser.
Unless someone has remover the central locking in the past (can't think of a reason why they would ?) you will have it. Pretty sure all 90's TVR's did.
The locks themselves are actually located in the rear wing, not the door. The door just has a catch on the inside edge. Move the seat forward out of the way and there is an access point to the locks and solenoids on the inside (behind the carpet) at the same point the door catch meets the rear wing.
The solenoids operate the door locks and sometimes fail, but are easily replaced. Re-reading your posts again makes me wonder if you have the remote key fobs ? If you do are the batteries dead ? The fobs sometimes need to be synchronised with the alarm/immobiliser.
Edited by GJR on Friday 6th March 09:15
GJR said:
Tvrjock said:
Could it bee they are future Griff owners
Tvrjock ..... go stand in the corner!! 
All Griff owners are real men, well balanced men. That's why we bought sports cars rather than soft GT's 
Now get in the corner like the man said and be nice from now on.
:hard paddington stare:
Barkychoc said:
spend said:
Hmmm... using terms like 'darling' suggest that you may be yet another closet poo miner? You should join PhatDaddy and a buy a nice Toymota hairdresser's car in that case 
All those 'pack it with vaseline' threads suddenly make sense 

the old Vaseline is in abundance round his place(he likes packing his oil pump)amongst other cavities 
Edited by Pushrod-Power on Friday 6th March 10:27
Bubblehead, try explaining to people what your car is as a start;) most here will not even have seen Chims with keylocks. There are 3 door opening designs, and @3 different alarm/immobs fitted over the years. That does not take into account any after market butchery / mods that may have been undertaken ...
Its quite important to have details of your car in your profile so you will attract relevant responses.
Just for the record I hate vaseline in oil pumps BTW, prime via the PRV is my tip. Vaseline is only useful on a few gaskets and jamming in ringland when cleaning your piston as far as I am concerned
Its quite important to have details of your car in your profile so you will attract relevant responses.
Just for the record I hate vaseline in oil pumps BTW, prime via the PRV is my tip. Vaseline is only useful on a few gaskets and jamming in ringland when cleaning your piston as far as I am concerned

It sounds like your c/l and alarm are there but the previous owner didn't include the remote fob. As spend said earlier, try calling Carl Baker (website). He gets high praise on here and is familiar will the TVR c/l and alarm systems. It may turn out that it's not necessary to replace the c/l, but maybe you just need new fobs ?
I'm not sure if Chimaera's with key entry locks also have remote c/l, but you should certainly have a small rectangular plastic key that fits into the immobiliser point on the steering cowl to deactivate the immobiliser. Your alarm system may be different but with mine ('97 plate) the immobiliser activates after so many seconds of the engine being turned off. The fact that you don't seem to have the rectangular key and you can start the car at will suggests the alarm/immobiliser may have been deactivated ?
ETA: If you need work done on the alarm system, especially if it's a CAT 1 alarm, it's probably best to take it to qualified fitters rather than a DIY job for insurance validation reasons.... think spend mentioned that too...
I'm not sure if Chimaera's with key entry locks also have remote c/l, but you should certainly have a small rectangular plastic key that fits into the immobiliser point on the steering cowl to deactivate the immobiliser. Your alarm system may be different but with mine ('97 plate) the immobiliser activates after so many seconds of the engine being turned off. The fact that you don't seem to have the rectangular key and you can start the car at will suggests the alarm/immobiliser may have been deactivated ?
ETA: If you need work done on the alarm system, especially if it's a CAT 1 alarm, it's probably best to take it to qualified fitters rather than a DIY job for insurance validation reasons.... think spend mentioned that too...
Edited by GJR on Friday 6th March 13:02
GJR, not quite.
My Chim is a '95 and has key driven central locking, and an alarm/immobiliser, but no seperate plastic key i.e. immobilser triggered by C/L. I have all of the documentation from new, and no record of alarm mods.
I'd like remote locking too - guess a call to Carl Baker is in order (plus modwise for the boot release)
My Chim is a '95 and has key driven central locking, and an alarm/immobiliser, but no seperate plastic key i.e. immobilser triggered by C/L. I have all of the documentation from new, and no record of alarm mods.
I'd like remote locking too - guess a call to Carl Baker is in order (plus modwise for the boot release)
GJR, not quite.
My Chim is a '95 and has key driven central locking, and an alarm/immobiliser, but no seperate plastic key i.e. immobilser triggered by C/L. I have all of the documentation from new, and no record of alarm mods.
I'd like remote locking too - guess a call to Carl Baker is in order (plus modwise for the boot release)
My Chim is a '95 and has key driven central locking, and an alarm/immobiliser, but no seperate plastic key i.e. immobilser triggered by C/L. I have all of the documentation from new, and no record of alarm mods.
I'd like remote locking too - guess a call to Carl Baker is in order (plus modwise for the boot release)
Gassing Station | Chimaera | Top of Page | What's New | My Stuff






