Rebuild engine in first or last
Rebuild engine in first or last
Author
Discussion

CaptDaveRobinson

Original Poster:

42 posts

215 months

Friday 6th March 2009
quotequote all
Just a point I have been mulling over for the last couple of weeks. I am rebuilding from ground up (will post some photos soon) and wondering whether it will be better to re-attach the chassis to the body first; then drop the engine and gearbox in, or better to rebuild the full transmission with body off and lower it after?

any thoughts?

Ps. I need a new handbrake cable as well; is this standard sierra?

spend

12,581 posts

282 months

Friday 6th March 2009
quotequote all
Put the engine in first, out last - I guess the moot point has been people struggling with exhaust manifolds.

CaptDaveRobinson

Original Poster:

42 posts

215 months

Monday 9th March 2009
quotequote all
That's what I was thinking because I had enough trouble with access trying to get them off! What is the best way of doing the bottom bolts back up with the engine in situ?

spend

12,581 posts

282 months

Monday 9th March 2009
quotequote all
Clean all the threads & copper slip first. Do make a note of which bolts you cant get in/out with manifolds seated (a couple you need to put in a little bit first wink )

A few horror stories may be down to this..hehe Theres nowt as daft as folk rofl

slideways

4,101 posts

252 months

Monday 9th March 2009
quotequote all
i found dropping the exhaust is best to access all from under the car but must admit you do need girl sized hands and right angled four arms,
i had to nip mine up the other day and managed it all from above, i do have the better arp bolts now much easier
Rich