Rocker Cover Removal
Discussion
Afternoon chaps,
Whilst in the process of changing over the top end breathing on the engine I thought i'd fit some loverly new powder coated rocker covers. Passenger side one went fine but the driver side is becoming a real PITA - i can't get enough clearance at the firewall end to lift out.
Do i have to release the fuel lines from the rail to faciliate? Or am i missing a simple trick?
Hodgo
Whilst in the process of changing over the top end breathing on the engine I thought i'd fit some loverly new powder coated rocker covers. Passenger side one went fine but the driver side is becoming a real PITA - i can't get enough clearance at the firewall end to lift out.
Do i have to release the fuel lines from the rail to faciliate? Or am i missing a simple trick?
Hodgo
hodgo said:
Afternoon chaps,
Whilst in the process of changing over the top end breathing on the engine I thought i'd fit some loverly new powder coated rocker covers. Passenger side one went fine but the driver side is becoming a real PITA - i can't get enough clearance at the firewall end to lift out.
Do i have to release the fuel lines from the rail to faciliate? Or am i missing a simple trick?
Hodgo
I un clipped my fuel rails also water pipes were disconnected a bit fiddly but done it in the end.Whilst in the process of changing over the top end breathing on the engine I thought i'd fit some loverly new powder coated rocker covers. Passenger side one went fine but the driver side is becoming a real PITA - i can't get enough clearance at the firewall end to lift out.
Do i have to release the fuel lines from the rail to faciliate? Or am i missing a simple trick?
Hodgo
I had put a dab of silicone on the rocker lip to stick the gasket to make things easier and left it overnight.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


