Programming Key Fob
Discussion
Could someone please post up the instructions for programming the extra keyfobs. I have the master one which works fine but the second fob looses sync when the battery has been disconnected for awhile, I remember doing a sequence of locking/unlocking to add the second fob to the alarm but have lost the instructions.
It's I belive the meta system on a 99 Chimera.
It's I belive the meta system on a 99 Chimera.
Arm and disarm the alarm sixteen times or until the alarm stops responding, alarm now in program mode.....
Once in program mode press the button of the new remotes(s), press the button of the original remote(s). This must be done within 8 seconds of each action. If 8 seconds pass without any actions the alarm will automatically exit programming mode and you will have to start from step 1.
Wait 8 seconds to exit learning mode.
Test remotes.
Once in program mode press the button of the new remotes(s), press the button of the original remote(s). This must be done within 8 seconds of each action. If 8 seconds pass without any actions the alarm will automatically exit programming mode and you will have to start from step 1.
Wait 8 seconds to exit learning mode.
Test remotes.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



