Noisy new stepper motor
Discussion
Hi, I replaced the stepper motor as someone overtightened the old one, not me! Anyway, it is now quite noisy on acceleration and on overrun, but quiet as a wee mouse on tickover!And tickover is great, returns to even tickover no problem. Does it need to be screwed in more? Is it not seating correctly? Is it vacuum? Any help be great, Thanks.
Air past the stepper does not fit your symtoms, it just makes the tick over too high or unstable. The Stepper its self just needs nipping up, and you can put PTFE tape around the thread if you are worried its leaking. Some of the cheap E-bay steppers are badly made and let air in past the motor, but again the symtoms are wrong.
steviegasgas said:
noisy on acceleration and on overrun
I'm struggling to imagine the stepper motor making so much noise that you can hear it under those conditions. What sort of noise is it, and are you sure it's coming from the stepper motor? You can easily rule the stepper motor out by unplugging it to see if the noise stops.Gassing Station | Chimaera | Top of Page | What's New | My Stuff


