V8 Weakness - help needed!!
Discussion
Hello,
I'm a new member since 5 mins ago. I bought a 450 Chim in blackpool last summer and it took me the whole winter to get it road legal in Germany ;-(
I've driven it for about 2kmiles by now and would say it's the best (road-car) I'v ever driven. As you can imagine first time driving a TVR always is "a big thing" it's making brutal sound and acceleration is also impressive. But I kind of got used to it by now and was wondering about the power and torque. In lower speeds its acceleration is as expected, but unfortunatly if once reached 90 miles/h my girlfriends Z4 3.0si is not a bit slower (despite being 400kg plus and 20hp weaker).
In different topics I read about 325bhp on 5L engines and 300 on a 4.6!
To make it short: my Dyno says: cluch power: 234hp @5300rpm and 260ft @ 3250rpm. That's far away from what my insurance wants to be paid for and from what my owner's manual is saying???
Is that normal or can I do something to gain power?
My hardware: 11/97 serp 4.6 engine, de-catted, oxygen-sensors, Magnecor stuff, pipercross filter and engine rebuild 5kmiles ago with "performance cam shaft-kit" at Offord Motor Co.
Would be very nice to get some help, since it's hard to get over here.
I'm a new member since 5 mins ago. I bought a 450 Chim in blackpool last summer and it took me the whole winter to get it road legal in Germany ;-(
I've driven it for about 2kmiles by now and would say it's the best (road-car) I'v ever driven. As you can imagine first time driving a TVR always is "a big thing" it's making brutal sound and acceleration is also impressive. But I kind of got used to it by now and was wondering about the power and torque. In lower speeds its acceleration is as expected, but unfortunatly if once reached 90 miles/h my girlfriends Z4 3.0si is not a bit slower (despite being 400kg plus and 20hp weaker).
In different topics I read about 325bhp on 5L engines and 300 on a 4.6!
To make it short: my Dyno says: cluch power: 234hp @5300rpm and 260ft @ 3250rpm. That's far away from what my insurance wants to be paid for and from what my owner's manual is saying???
Is that normal or can I do something to gain power?
My hardware: 11/97 serp 4.6 engine, de-catted, oxygen-sensors, Magnecor stuff, pipercross filter and engine rebuild 5kmiles ago with "performance cam shaft-kit" at Offord Motor Co.
Would be very nice to get some help, since it's hard to get over here.
TVRs power figures are bobbins in the most part. A normal 450 is maybe 250bhp compared to 285bhp quoted in the handbook.
I would say your torque figure looks healthy but peaking at 3250rpm seems low, so I am guessing this is resulting in the low bhp figure. Mine for example makes 270ftlbs but at 4750rpm, so that gives 273bhp.
I wonder what cam was fitted?
I would say your torque figure looks healthy but peaking at 3250rpm seems low, so I am guessing this is resulting in the low bhp figure. Mine for example makes 270ftlbs but at 4750rpm, so that gives 273bhp.
I wonder what cam was fitted?
The numbers you're quoting are a bit low for a 4.6 but you don't say what heads or induction system you have and this can make a big difference. In any case it can be misleading to compare figures from different rolling roads so unless you have figures from other similar engines on that rolling road to compare to I wouldn't put much faith in the absolute numbers. The shape of the torque curve would tell you whether your engine is basically healthy, and a wideband sensor in the exhaust during the power run would tell you whether the fuelling is about right.
Hey there,
thanks for your very quick answers!! My torque looks like a plateau from 2000rpm to 5000 it is constantly over 220 with a peak between 3000 and 4000 producing about 256ft-lbs. Power increases to 5400 (234hp), than falls like nothing @ 6400 (180hp) both clutch power!?
I guess the problem could be my standard Airflow, inlet, trumpets. It feels that after having reached 4500rpm there's something missing. Had the same once in my Astra OPC racecar on "Döttinger-Höhe" when fuel pressure wasn't enough in full throttle-pos.?
I want to modify my Air-Inlet whatever, but since I'm a student it's hard to afford (even owning it ;-).
Anybody probably some used stuff or am I completly wrong?
cheers Basti
P.S. somebody probably knows my car? It's a hlcyon midas Tuscan seated one, the former owner's name was Matt (Blackpool)
Supposed to be a former TVR chairman's "rocket"
thanks for your very quick answers!! My torque looks like a plateau from 2000rpm to 5000 it is constantly over 220 with a peak between 3000 and 4000 producing about 256ft-lbs. Power increases to 5400 (234hp), than falls like nothing @ 6400 (180hp) both clutch power!?
I guess the problem could be my standard Airflow, inlet, trumpets. It feels that after having reached 4500rpm there's something missing. Had the same once in my Astra OPC racecar on "Döttinger-Höhe" when fuel pressure wasn't enough in full throttle-pos.?
I want to modify my Air-Inlet whatever, but since I'm a student it's hard to afford (even owning it ;-).
Anybody probably some used stuff or am I completly wrong?
cheers Basti
P.S. somebody probably knows my car? It's a hlcyon midas Tuscan seated one, the former owner's name was Matt (Blackpool)
Supposed to be a former TVR chairman's "rocket"

Well thx for that,
it really says Ch 4.5 cat!!
that's probably why it's not performing the way it should??
What can Ido?? Is the only way to bring it over and hand it to Mark Adams for 800pounds??
It's a standard 4.6 de-catted with cherry-bombs and performance cams. Is anyone offering "pre-tuned" ecus??
best regards, Basti
it really says Ch 4.5 cat!!
that's probably why it's not performing the way it should??
What can Ido?? Is the only way to bring it over and hand it to Mark Adams for 800pounds??
It's a standard 4.6 de-catted with cherry-bombs and performance cams. Is anyone offering "pre-tuned" ecus??
best regards, Basti
TVR Power will do a chip for significantly less off the shelf but I wouldn't have thought it was all down to the chip? Looks like you are about 20 hp down at least.
Call Offords and ask what cam was fitted, quote the UK registration number and they might have a record. I think that this will be critical in understanding whether there is a problem or not.
Call Offords and ask what cam was fitted, quote the UK registration number and they might have a record. I think that this will be critical in understanding whether there is a problem or not.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff




