Gearbox / clutch
Gearbox / clutch
Author
Discussion

Shabs

Original Poster:

1,866 posts

237 months

Monday 16th March 2009
quotequote all
Guys,

A quick noob question. On yesterday's Beds and Herts run, near the end (so after 4+ hours of enthusiastic driving) I noticed that after driving hard in one gear with a fair amount of accelerate, power off, break, accelerate (all in the same gear) that the gear was sticking needed to be almost snapped out into neutral. The feeling was like the gear stick was attached to two electro-magnets in that it wouldn't budge and then, snap, it was out. Under normal driving conditions, this doesn't happen at all and after it "snapped" out of gear, it was easy to put into any gear. Does this sound normal for heavy driving, or, like my gearbox is slightly fooked, or, that something to do with my clutch is slightly fooked?

Many thanks,

Shabs

rolling_thunder

152 posts

223 months

Monday 16th March 2009
quotequote all
Most of the Chim gearboxes appear to be a bit sticky and you will find a number of threads on the subject. Essentially the gearbox has a number of remote linkages on top of it that stick after a period of time. If you remove the centre console (look for threads on this) you can re-grease the linkage. This may be all you need to do unless you are unlucky.

Because of these linkages the gearbox is not smooth as you would normally expect and some owners DO say they have to hit the gearstick out of second position. Personally mine is stiff from second but mostly okay...

Shabs

Original Poster:

1,866 posts

237 months

Monday 16th March 2009
quotequote all
Great thankyou