Aaargh .... £6,000 engine rebuild
Aaargh .... £6,000 engine rebuild
Author
Discussion

rbryant

Original Poster:

318 posts

272 months

Tuesday 17th March 2009
quotequote all
Hi all - I have some difficult choices to make

My Chimaera 450 melted its cam bearings, and Paul at Austec tells me there is not a lot that doesn't need doing. £6,000 gets me a rebuilt, balanced, effectively blueprinted engine.

Now I have no doubt that Paul and crew will do a first class job, but I had already decided to sell the car after nearly 5 years. If I was keeping it, then I would get the benefits but right now the considerations are purely commercial. So do I
1) try to sell in present state to someone who wants a project
2) Pay up and sell a great car with a fresh engine
3) Look for a cheaper replacement engine

It's a 1999 car with sound chassis and first class bodywork and Intrax suspension

spend

12,581 posts

282 months

Tuesday 17th March 2009
quotequote all
Buy a used 500 engine & slap it in. win-win

JR

14,332 posts

289 months

Tuesday 17th March 2009
quotequote all
3) would be the most economic choice for selling immediately.

MuffDaddy

1,507 posts

236 months

Tuesday 17th March 2009
quotequote all
Depends on your thinking but 6k will get you a nice LS fitted in 7 days.

Zippee

14,157 posts

265 months

Tuesday 17th March 2009
quotequote all
spend said:
Buy a used 500 engine & slap it in. win-win
That would be my choice. 6k is a heck of a lot to spend on the RV8 IMHO unless you're serious about keeping and modding.

Taraka30

225 posts

239 months

Tuesday 17th March 2009
quotequote all
You might also want to speak to other engine rebuilders to get alternate quotes but guessing the others advice on here is sound around which choice is cheapest...

griffdude

1,938 posts

279 months

Tuesday 17th March 2009
quotequote all
Two really good options for you are;
http://www.v8developments.co.uk/
http://www.rover-v8.com/
They're both RV8 gurus
HTH

Benjaminpalma

1,214 posts

213 months

Tuesday 17th March 2009
quotequote all
Blueprinted??! Does anyone know how much just a bog-standard factory-spec rebuild would cost?

rbryant

Original Poster:

318 posts

272 months

Tuesday 17th March 2009
quotequote all
Thanks guys - am finding out much more than I knew a few hours ago. Spoke to Chris at RPi Engineering http://www.v8engines.com/index.html and a short engine seems to be the way to go.

Other links - will check ou - much appreciated

Cheers

Richard

900T-R

20,406 posts

288 months

Tuesday 17th March 2009
quotequote all
For £6K to blow on an RV8, I'd expect a lot more than just 'blueprinted' - but indeed, a serious engine can cost serious money. A properly built one however, is a joy. cloud9

spend

12,581 posts

282 months

Tuesday 17th March 2009
quotequote all
rbryant said:
Thanks guys - am finding out much more than I knew a few hours ago. Spoke to Chris at RPi Engineering http://www.v8engines.com/index.html and a short engine seems to be the way to go.

Other links - will check ou - much appreciated

Cheers

Richard
If you want a short engine, I'd buy one 200 times out of 100 from V8D instead of RIP wink

ETA: typo gets round N&S rather nicely laugh (thats 'nicely' used in its truest sense biggrin)

Edited by spend on Tuesday 17th March 14:39

rbryant

Original Poster:

318 posts

272 months

Tuesday 17th March 2009
quotequote all
Hi Spend - V8D look good but why better than RPi - typo excused :-)

robbri

264 posts

240 months

Tuesday 17th March 2009
quotequote all
V8D use top hat liners and are one of the best engine builders around i have just had a 4.6 V8D engine fitted in my chimaera maybe worth a call they will give you good advice.

steve-V8s

2,924 posts

279 months

Tuesday 17th March 2009
quotequote all
I vote for V8D over the others mentioned. Only problem is they are a long way from everywhere. If you have been there you will know what I am getting at.

Del 203

12,728 posts

280 months

Tuesday 17th March 2009
quotequote all
V8D End of biggrin

When i had a certain engine problem/others appeared rolleyes I took the engine away from the "specialist" & sent it to the people who know what they are doing biggrin

spend

12,581 posts

282 months

Tuesday 17th March 2009
quotequote all
V8D wont try & sell you an 'improved' ignition amplifier rofl

Just call V8D, there won't be any bullst round there either, they've just ploughed the fields rofl Whether its Ray, Rob or Shaun who answers they are all top guys and care about what they do.

I'd go as far to say if you just want an engine swap - trailer the car up to them they'll have it in out with no fuss. TBH I don't even bother to ask them prices even & I'm always pleasantly surprised when they ask for money - how many people do you trust like that these days?

Bluebottle

3,498 posts

271 months

Tuesday 17th March 2009
quotequote all
£6k yikes

That sought of money will get you a brand new bespoke built 5.2 ltr engine from John Eales or V8Developments and you can sell you old 450 to offset some of the costs, as the 450 is cross bolted and desirable second hand.

Al 450

1,390 posts

252 months

Tuesday 17th March 2009
quotequote all
Not knocking Austec because I'm sure they'll do a cracking job but you could get this done cheaper if you needed to.

I had a full engine rebuild for exactly the same issue (cracked cam bearings) with balanced and polished crank and pistons, lightened flywheel, big end and cam bearings, new rings and hone block, rockers, timing gear, cam kit, head stud kit, adjustable pushrods, engine mounts, fuel hoses, oil seals, rocker covers, all gaskets, silicon hose kit, silicon heater pipes, test and clean injectors, acid dip cylinder head, grind valve seats, steam and pressure test block, 1 year warranty AND 12,000 mile service for significantly less than that.

Once the block is out which it will need to be if it's the rear bearing affected (needs pressing in) then the actual 'blueprinting' bit is next to nothing cost wise so it's a must in my opinion.

And yes I am very happy with my engine! driving

Pm me for details mr Bryant if you like.



rbryant

Original Poster:

318 posts

272 months

Tuesday 17th March 2009
quotequote all
You guys are great, thanks. V8developments it is then - will call them in the morning and work out how to get the car to them.

Cheers

Richard

S7Paul

2,103 posts

265 months

Tuesday 17th March 2009
quotequote all
Al450 & rbryant - any idea what caused the cam bearing failures on your engines (not that I'm starting to worry or anything)?