Fitting new radiator
Fitting new radiator
Author
Discussion

PxMetro

Original Poster:

43 posts

220 months

Tuesday 17th March 2009
quotequote all
I am in the middle of fitting a new Aluminum "Radtec" radiator to my 450 Chimaera. The gap between the front of the radiator and the body is close to 25mm, which is slightly larger than with the standard radiator. Has anyone fitted one of these that can offer advice as to what to use to fill in the gap? The Sponge tape taken from the old radiator is well past it's sell by date!

Thanks

chrispitman

742 posts

285 months

Wednesday 18th March 2009
quotequote all
When I recored my rad it never came back with the foam, I found a local packaging company that made custom packaging using a black small cell foam. They let me raid there skips for any off cuts I wanted for free.

PxMetro

Original Poster:

43 posts

220 months

Wednesday 18th March 2009
quotequote all
chrispitman said:
When I recored my rad it never came back with the foam, I found a local packaging company that made custom packaging using a black small cell foam. They let me raid there skips for any off cuts I wanted for free.
Interesting solution Chris. Did you attach it to the radiator or the front panel. Not sure if I have such a company local to me, but good thought.

Cheers

chrispitman

742 posts

285 months

Wednesday 18th March 2009
quotequote all
I used a little glue and attached it to the rad. You could try an upholster for an off cut of foam just make shure it will withstand the heat.