Discussion
nawarne said:
Hey, c'mon guys these ARE TVRs you know!!??!!
I've got two - nah, nah-nah! One on the chassis and the other is close to the battery inside the passenger footwell. Don't know wether it is just a piece of wire inside the case though!.
Nick
Same here,same locations both fused.I've got two - nah, nah-nah! One on the chassis and the other is close to the battery inside the passenger footwell. Don't know wether it is just a piece of wire inside the case though!.
Nick
nawarne said:
Hey, c'mon guys these ARE TVRs you know!!??!!
I've got two - nah, nah-nah! One on the chassis and the other is close to the battery inside the passenger footwell. Don't know wether it is just a piece of wire inside the case though!.
Nick
Quite right, it's just that after completing a lot of niggly small (and some not so niggly and small) jobs over the winter, some of the 'design features' just make me smile.I've got two - nah, nah-nah! One on the chassis and the other is close to the battery inside the passenger footwell. Don't know wether it is just a piece of wire inside the case though!.
Nick
p.s. Must check the other fuse (if there's one in there.)
Sorry to resurrect an old thread, but just to add to the confusion....
I was under the car fitting a new starter motor the other day and thought I'd check the 100 amp fuse while I had the chance, only to find that the fuse on my car is an 80 amp item. Has anyone else found this on their car? Should I replace it with a 100 amp fuse?
I was under the car fitting a new starter motor the other day and thought I'd check the 100 amp fuse while I had the chance, only to find that the fuse on my car is an 80 amp item. Has anyone else found this on their car? Should I replace it with a 100 amp fuse?
bubblehead said:
So would you recomend retro fitting one then, obviously not where TVR fitted it, where would would you recomend?
Yes, this can be easily done. On my first TVR, the main battery to alternator lead started chaffing and shearing on the engine side of the starter motor (absolute nightmare to track down the problems that this caused!). Some Estonian mechanics and I replaced the cable but lengthened it and placed the 100 amp box further forward and about 6" upwards to secure it to a box section of the chassis, just behind the front offside wheel brake disc.
This served two purposes. A) I didn't have to crawl under a low car to change the fuse with my legs sticking out into the road. And, B)-?
anyone that drove past assumed I was changing a defective tyre, thus saving our reputation of not owning unreliable cars

You can buy a new fuse holder here for a couple of pounds:
http://cgi.ebay.co.uk/TVR-Main-Fuse-Holder-+-1-x-1...
..and the fuses themselves retail at around 10p each.
Edited by kenny Chim 4 on Wednesday 15th April 23:54
S7Paul said:
I was under the car fitting a new starter motor the other day and thought I'd check the 100 amp fuse while I had the chance, only to find that the fuse on my car is an 80 amp item. Has anyone else found this on their car? Should I replace it with a 100 amp fuse?
Mine blew in France last year - the one near battery, found it was a 60 amp fuse!, had been fine for previous 3 years may be longer, replaced with spare 100amp, no problems since.PS don't keep the spare in the boot !!!
Gassing Station | Chimaera | Top of Page | What's New | My Stuff







its just that TVR stuck one in such a silly place 