correct wiring position
correct wiring position
Author
Discussion

barrybike

Original Poster:

33 posts

274 months

Wednesday 18th March 2009
quotequote all
can some one explain the correct position for the wiring and injection ecu by the battery on a 94 4.0 hc chimera, can never get the wiring and all the injection bitd and bobs tidy behind the cover panel.

GreenV8S

31,027 posts

315 months

Wednesday 18th March 2009
quotequote all
The correct position is (a) out of sight and (b) not shorting on the battery or exposed conductors on the fuse/relay panel.

spend

12,581 posts

282 months

Wednesday 18th March 2009
quotequote all
I used to stick the gubbins in rubber gloves wink, keeps dry & insulated. If you open the ECU you can drill out the pop rivets and get rid of the LR mounting bracket, which makes it easier to wedge down the side of the battery (if its floor mounted hehe). If you want to go the whole hog relay & fuse holders are not expensive, then you can fix the flying loom to the bottom of the dash / behind the glove panel..

An awful lot of the excess loom has to be carefully stuffed up the inner wing / transmission tunnel area.