wish bones ,
wish bones ,
Author
Discussion

daz the plumber

Original Poster:

14,997 posts

262 months

Thursday 19th March 2009
quotequote all
can any one give me any advice on where to purchase wish bones , am i better to get them with the bushes fitted or use the set of steve heath bushes i have .any advice .im aware you can get uprated wishbones but they are out of my budget .

M@H

11,298 posts

303 months

Thursday 19th March 2009
quotequote all
I would buy them bushed personally if going for standard but it depends on what your plans are with the bushing - what are the SH ones that you have? You'll find new wishbones on Ebay amongst a variety of other suppliers - I even think ACT supply them !?

I know you say uprated wishbones (do you mean tubular?) are out of your budget but it is cheaper than performace chip re-mapping and rolling road sessions wink

Cheers,
Matt

Edited by M@H on Thursday 19th March 11:26

spend

12,581 posts

282 months

Thursday 19th March 2009
quotequote all
If you mean you already have poly bushes from Steve, then yes get the wishbones without bushes and just press the polys in.

My Penisular tubular wisbones didn't cost a great deal more than standard ones IIRC it was only @ £50 more? Difference comparable to £1000's in other areas IMHO, but I never tried later one piece versions...

CHGRIFF

326 posts

283 months

Thursday 19th March 2009
quotequote all
SC Power supply TVR approved wishbones to the TVR community and they are now zinc coated before powder coating to give additional protection to prevent rust. They do complete wishbone sets at a very good price apart from individual parts. Their design of the front lower wishbone is designed for additional strength when fitting uprated springs and suspension.

Barreti

6,689 posts

268 months

Thursday 19th March 2009
quotequote all
spend said:
If you mean you already have poly bushes from Steve, then yes get the wishbones without bushes and just press the polys in.

My Penisular tubular wisbones didn't cost a great deal more than standard ones IIRC it was only @ £50 more? Difference comparable to £1000's in other areas IMHO, but I never tried later one piece versions...
Did you ever do anything with the front pair I lent you spend?
I thought you'd plans for making some adjustable versions but I've not seen you mention them yet

spend

12,581 posts

282 months

Thursday 19th March 2009
quotequote all
They were top rears Ian confused

Yes I have some adapted for camber adjustment, not your old ones though as I just used them as templates vs the ones I chopped up. They still need welding properly, I only trusted myself as far as tacking the flanges in place laugh

Didn't go any further as in contemplation I really would like tubulars and the possibility to use a lighter upright. Never been happy with the weight of those damned things TBH. Its on my list of things todo, but not at the top hehe

ROBTVR

208 posts

261 months

Thursday 19th March 2009
quotequote all