Dash removal - the small one
Dash removal - the small one
Author
Discussion

Shabs

Original Poster:

1,866 posts

237 months

Thursday 19th March 2009
quotequote all
Guys,

To get out the little dash where the radio is, what do I need to do? Is this taken out after taking off the big dash with the speedo / rev counter etc?

Shabs

spend

12,581 posts

282 months

Thursday 19th March 2009
quotequote all
You dont need to do anything to the dash top to get the radio panel out.

Remove the radio cage and behind it there will be 4 small screws that 'tack' it in.

Be careful as you ease it out to note the wiring connections, they may pop off & perplex your logic in putting them back. Always good to make your own drawing just in case wink

dorrick

32 posts

221 months

Thursday 19th March 2009
quotequote all
Hi ,

To remove the lower dash you need to remove the Radio .

Once you have removed the Radio you will see two brackets which are fixed by screws .
Undo these screws and the surround will come away .

Shabs

Original Poster:

1,866 posts

237 months

Monday 27th April 2009
quotequote all
Thanks guys - reason I ask is that my radio half fell out whilst driving and the little dash cracked in three places in the process! In addition, half of my speakers stopped working - so I am guessing that the radio pulled out a bunch of leads smile

Shabs

GJOSDDLO

92 posts

211 months

Monday 27th April 2009
quotequote all
How are you going to fix your cracked Dash?

I ask, because I have a few chips & cracks in my lower dash.

I know a lot of folks have replaced their dash with the Chrome effect, but I quite like my walnut effect. Would be interested to know how you'd repair it (if that what you intend to do)


Cheers

dogbucket

1,256 posts

232 months

Monday 27th April 2009
quotequote all
I araldited the lifting veneer back on (held with clothes pegs to dry), which worked quite well.

Shabs

Original Poster:

1,866 posts

237 months

Monday 27th April 2009
quotequote all
dogbucket said:
I araldited the lifting veneer back on (held with clothes pegs to dry), which worked quite well.
was my plan TBH