Damn-Blast come off you horrible cable.....
Damn-Blast come off you horrible cable.....
Author
Discussion

rolling_thunder

Original Poster:

152 posts

223 months

Saturday 21st March 2009
quotequote all
Guys -

A Handbrake question...

I have a 98 Chimaera with vented disks and i am swapping out my rear brake calipers for a pair that actually work. The calipers came off the car with no issues but I cant work out how to lift the handbrake cable off the retaining plate - see picture. I removed the big spring (made no difference) and the cable can move freely... but i cant for teh life of me see how the cable can be removed from the caliper.

The 'bible' says "lift off". Yeah right...

Help please...

Thanks RT

Click on the broken picture link - it takes you to a web album - i cant workout how to embed pictures here....



Edited by rolling_thunder on Saturday 21st March 17:07

That Daddy

19,464 posts

252 months

Saturday 21st March 2009
quotequote all
You need to slacken the cable adjuster or sometimes if you move the linkage forward you can kick the cable to the side and slide out of the linkage(does not work on all Girling calipers,more likely achieved by slackening the cable though.

PurpleV8

137 posts

247 months

Saturday 21st March 2009
quotequote all
Did mine last year and it was a pain to get off. As I remember it, hold the fitting at the end of the cable with pliers or mole grips and when looking from the same angle as the picture was taken, twist anti clockwise to get it off the arm. To do this you will need to feed some slack cable through the retainer and this is easier once the plastic insert in the caliper that the cable passes through is slide up the cable and out of the caliper. It will twist out with pliers or mole grips.

rolling_thunder

Original Poster:

152 posts

223 months

Sunday 22nd March 2009
quotequote all
Well.... i loosened off the 2 handbrake adjuster things by a long long way and eventually the cables slipped off the caliper plate. So that is my tip. Loosen the adjuster, then loosen the adjusters some more, then loosen the adjusters even more, then to finish loosen the adjusters some more. I must have wound the adjusters back a good inch (25mil to the post 70's people). And it was still a pain in the donkey.

Job done now though. Just got to bleed the brakes then tighten the handbrake back up again.

RT