tvr help
Author
Discussion

dc400

Original Poster:

125 posts

237 months

Sunday 22nd March 2009
quotequote all
hi all. i have a 4.0lt chim 1996. car starts ok , engine will rev but when foot off gas it cuts out . the car will drive ok up to about 1500- 1800rev then dies and cuts out .i have changed plug leads and dist cap , cleaned stepper motor ,unpluged ecu to see if it resets but still the same.if its got to go into hhc or some other garage it may take some time to get there at 1500revs. any help please . derek. in durham.

grahamw48

9,944 posts

269 months

Sunday 22nd March 2009
quotequote all
Just take it to a decent local garage (there's a RV8 specialist in Lanchester...not far from you ?).

It will be either fuel or ignition, but outside chance of EFI wiring loom breaking down somewhere because of underbonnet temps on these cars.

You can spend a fortune on replacing bits, whereas a decent auto technician will pinpoint it in minutes.

I took mine to Falcon in Middlesbrough when having similar issues (it was timing and distributor wear)... maybe a bit far for you.

Good luck anyway. smile

eta: Also consider a 'mobile mechanic'

Edited by grahamw48 on Sunday 22 March 11:18

dc400

Original Poster:

125 posts

237 months

Sunday 22nd March 2009
quotequote all
Hi Graham I will have a look for somewhere local tommorow .The car had to breakdown sometime , I have had it 4 years and this is the first time I have had any trouble .Thanks DEREK.

andy-w

1,987 posts

257 months

Monday 23rd March 2009
quotequote all
dc400 said:
Hi Graham I will have a look for somewhere local tommorow .The car had to breakdown sometime , I have had it 4 years and this is the first time I have had any trouble .Thanks DEREK.
If you are still stuck give me a shout and i will pop round and have a glance...fresh pair of eyes might notice something amiss????

dc400

Original Poster:

125 posts

237 months

Tuesday 24th March 2009
quotequote all
hi andy ,you are welcome to come have a look as i have looked at everything ,but my knowlage is limited ,im ok at changeing things when i know the fault but not so good at finding the problem. thanks derek,i live in belmont just off the durham jct off a1m. 07827947559 ny mobile

rfisher

5,069 posts

314 months

Tuesday 24th March 2009
quotequote all
Hi Derek.

Did you get my email?

dc400

Original Poster:

125 posts

237 months

Wednesday 25th March 2009
quotequote all
hi richard .i got your email thanks .been busy at work , how do i get tester from you .there is a plug in conector next to ecu. derek.

PRTVR

8,245 posts

252 months

Thursday 26th March 2009
quotequote all
Could be your fuel filter, thinking along the lines of as the need for fuel gets more the speed it passes through the filter increases and if there is any rubbish in the case it will get pushed onto the filter limiting the flow.

Have you posted your fault in the Chimaera section above ?
Phil

grahamw48

9,944 posts

269 months

Thursday 26th March 2009
quotequote all
dc400 said:
hi all. i have a 4.0lt chim 1996. car starts ok , engine will rev but when foot off gas it cuts out . the car will drive ok up to about 1500- 1800rev then dies and cuts out .i have changed plug leads and dist cap , cleaned stepper motor ,unpluged ecu to see if it resets but still the same.if its got to go into hhc or some other garage it may take some time to get there at 1500revs. any help please . derek. in durham.
Please let us know the outcome...then we can all learn something. smile