Nitrons spring selection
Nitrons spring selection
Author
Discussion

BrightYellowTVR

Original Poster:

1,258 posts

298 months

Monday 23rd March 2009
quotequote all
Having decided to replace my worn suspension with Nitrons I noticed you can specify the spring weights front/rear. Does anyone know the best spec to go for. I have read that the standard ones can leave the car lower. However, I am not really interested in lowering the car as it already grounds out sometimes. Any experience you can give would be appreciated. Cheers Jon

dumbfunk

1,727 posts

315 months

Monday 23rd March 2009
quotequote all
The spring platforms on Nitrons are fully adjustable so ride height is not an issue. There are choices to be made on the spring rate however that will greatly affect the quality of ride and handling. I went standard on my Griff but often wish I'd gone harder on the front.


dumbfunk

Red Cabbage

3,606 posts

263 months

Monday 23rd March 2009
quotequote all
I have std spring rates on my Nitrons 325F 250R. The ride quality is good, something I have to remind myself everytime I get tempted to go harder.

Chimjunkie

2,879 posts

242 months

Monday 23rd March 2009
quotequote all
I'm running 400/325 and would consider going stiffer still. Depends on how you use the car. I want the best out of the handling and am willing to sacrifice ride comfort. Have to say the car is superbly behaved on really bad roads smile

Uncle Fester

3,114 posts

239 months

Monday 23rd March 2009
quotequote all
I’m 400/325 as well.

If I was doing it again, I would go a bit harder, probably 450/375. I found that the ride improved greatly when I fitted lighter wheels and reduced the unsprung mass.

This then allows you to stiffen further for better handling, whilst allowing you to keep the ride acceptable.

dumbfunk

1,727 posts

315 months

Monday 23rd March 2009
quotequote all
Yep - something I noticed when fitting the 17" Pro Race 1.2s to mine.

steve-V8s

2,924 posts

279 months

Monday 23rd March 2009
quotequote all
Yep 400 325 also, easy upgrade from the standard as you only need to buy two front springs and move the fronts to the rear.

BrightYellowTVR

Original Poster:

1,258 posts

298 months

Monday 23rd March 2009
quotequote all
All,

Thanks for the updates, I will plumb for the 400/325 setup, it looks like you can specify this with no additional charge when ordering.

Will let you know how it handles once fitted, hopefully an improvement over the 11 year old originals. biggrin

Regards,
Jon