Ignition Amplifier Gel ??
Ignition Amplifier Gel ??
Author
Discussion

f@-pots

Original Poster:

204 posts

234 months

Friday 27th March 2009
quotequote all
Hi Guy's , I got a bunch of bits today from 'Racing Green' which included a brand spanky all shiney and new ignition amp. With it came a wee sachet of clear gel , now as you can guess, I'm pretty excited about having some new bits to fit to my P&J bounce, but I think that supplying me with 'lubricant' is a bit presumptious and if I felt the need for 'relief' in that department I'd supply my own!!wobble

It then occured to me that it may have another more practical purpose , so if anyone out there could enlighten me I would greatly appreciate it.

Yours in anticipation , Nick.....biglaugh.............

STE VR

501 posts

237 months

Friday 27th March 2009
quotequote all
Its some heat transfer gel. Just apply it liberally between the amp and the metal backplate. thumbup

daz the plumber

14,997 posts

262 months

Friday 27th March 2009
quotequote all
don`t know how much you paid for it, but did you know its fitted to a mini metro .i got a inter part electronic ignition amp (int15410)for £18.

Edited by daz the plumber on Friday 27th March 21:11

debaron

878 posts

228 months

Saturday 28th March 2009
quotequote all

My InterPart Amp lasted about 80 miles then gave up and left me stranded. Always try and get Land Rover/Rover Originals if possible.

And seconded with the thermal paste. It's pretty much the same stuff that goes on top of computer processors to make sure they transfer their heat to the heatsink efficiently.

daz the plumber

14,997 posts

262 months

Saturday 28th March 2009
quotequote all
what i am saying is keepaway from the tvr retailers and try and get them from other v8 specialists , they seem to charge a fortune for box standard stuff .

Edited by daz the plumber on Saturday 28th March 10:42

f@-pots

Original Poster:

204 posts

234 months

Saturday 28th March 2009
quotequote all
Hear what you're saying Daz , it grips my pooh too how much we pay compared to the jap boys etc especially as a lot of our bits are made from monkey metal. However , my new bits are all OEM and will hopefully do what they're supposed to do for longer than some of the cheaper versions (not holding my breath tho).

On the subject of the 'gel' , OK I'll 'wet'assemble the amp to the mounting plate using it as an interface as instructed. Makes you wonder though , if its temperature sensitive enough to require wet assembly with a conductive gel, wouldn't it be an idea to provide some cooling in that area ,and / or mount the whole assembly further from direct heat sources? maybe a heat sink of some kind as the engine its mounted to is a bit of a heat reservoir innit'?Just an idea)

Nick...........

Edited by f@-pots on Saturday 28th March 14:32

steve-V8s

2,924 posts

279 months

Saturday 28th March 2009
quotequote all
The Gel or “heat sink compound” does the job of filling any small imperfections in the mechanical joint between the component and the heat sink allowing good heat transfer. You only need a thin smear of it between the two surfaces.

f@-pots

Original Poster:

204 posts

234 months

Monday 30th March 2009
quotequote all
I understand how it works , cos I am a haircraft teknishun an doo lots of teknikel stuff for a livin'I jus thought it was unusual thats all.biglaugh

nawarne

3,181 posts

291 months

Monday 30th March 2009
quotequote all
debaron said:
My InterPart Amp lasted about 80 miles then gave up and left me stranded. Always try and get Land Rover/Rover Originals if possible.

And seconded with the thermal paste. It's pretty much the same stuff that goes on top of computer processors to make sure they transfer their heat to the heatsink efficiently.
Got to agree. On my V8S, with the old 2 wire amp attached to the side of the dizzy, the component sees a lot of heat.
Upshot, is the 'Intermotor' amp almost becomes a service item!! And the breakdown is totally randpm - some lasting 5000 mls and others failing in 500 miles.

Nick

paulathome

686 posts

249 months

Monday 30th March 2009
quotequote all
Agree with Nick,
Certain "TVR specialists" charge silly money for basically Range Rover bits.
Eg Specialists water pump £175. Range Rover water pump £42.00
Specialist ignition amp £46.00 minimum. Range Rover specialist amp £24.00
Specialist Alternator £220. Range Rover specialist £95.00
I could go on but certain bodily fluids are starting to boil.furious
Paul.