Pinking
Author
Discussion

debaron

Original Poster:

878 posts

228 months

Tuesday 31st March 2009
quotequote all

Hi all,

I suffer from really bad pinking after 20 mins or so normal use. Worst under 2000 rpm when in 4th/5th at 40 - 50 mph.

I've tried a few things such as octane booster - that seems to really help - pinking disappears completely. I always run on 97 octane plus but now got to thinking that my timing is out.


Which way should I adjust the timing - advance or retard? I'm thinking retarding would be best.

Which way does this relate to twisting the dizzy?


Thanks


Ryan

WokingWedger

1,030 posts

236 months

Tuesday 31st March 2009
quotequote all
I wanted to tweek my ditributor position too.

Anti clockwise is advance I beleive, as the rotation is clockwise.

Have you tried to get a socket on the dizzy clamp bolt yet?

If you manage to, let me know what you used please, I have tried a 9/16 socket on a 3/8 drive with a universal joint. Still wont go on due to the distributor body being in the way.

I even bought the special spanners, I can get one on, but there is no room to turn it !

Edited by WokingWedger on Tuesday 31st March 07:33

chrispitman

742 posts

285 months

Tuesday 31st March 2009
quotequote all
To adjust the dizzy, you just loosen the nut that holds the clamp, can be done with an open ended spanner Imperial I think but you only have limited movement. Remember to mark the dizzy and front cover befor moving so you have orignial setting.

debaron

Original Poster:

878 posts

228 months

Tuesday 31st March 2009
quotequote all

Yep, that clamp is a PITA.

In the end, removed PAS hose clip and Vacuum advance and then managed to use a hammer + centre punch on an edge to loosen it then big pair of long nose pliers.