Rocker Cover Bolts
Rocker Cover Bolts
Author
Discussion

WOO5IE

Original Poster:

967 posts

228 months

Tuesday 31st March 2009
quotequote all
It looks like I have a small oil leak that has left a couple of small oil patches on the drive.
On a quick inspection under the car I can see a 'Drip' on the bottom of the bell housing. It has always been leak free up till now. I wanted to checked the tightness of the Rocker Covers but I couldn't get any of my sockets to fit. I havent come across the twelve point bolt before. Is it a standard size . Would I be best to take rockers off and put new gaskets on with /without some sort of sealer.

I am not sure where the leak is coming from at the MO but the rockers were my first point of call.

I dont appear to be using/loosing any oil or dispstick level going down.

Could be sump but I would have thought the bottom of the sump would be covered in oil.
I need to jack the car up and have a decent look but I will also need to get a socket for the rocker bolts. Would Hafrauds sell them?

Anywhere else the leak could come from. I will also check in side the bell housing as I have inspection flap but I am hoping that is not coming from there.

Car has done 29K miles and is a 2000 4.0. No work has recently been done on the engine.


Trev

spend

12,581 posts

282 months

Tuesday 31st March 2009
quotequote all
A bent 8mm spanner can get them off with patience IIRC. Best bet is to replace them with socket caps (1/4 UNC IIRC - but 2 lengths are used), its much easier to get a long ball end hex key/socket down there wink

That Daddy

19,466 posts

252 months

Tuesday 31st March 2009
quotequote all
Like these http://cgi.ebay.co.uk/ROVER-V8-STAINLESS-ROCKER-CO... as mentioned already check the length.

Edited by That Daddy on Tuesday 31st March 15:33

V8 Animal

6,015 posts

241 months

Tuesday 31st March 2009
quotequote all
Would Hafrauds sell them?
Yes

That Daddy

19,466 posts

252 months

Tuesday 31st March 2009
quotequote all
V8 Animal said:
Would Hafrauds sell them?
Yes
Sell what Paul? scratchchin

V8 Animal

6,015 posts

241 months

Tuesday 31st March 2009
quotequote all
That Daddy said:
V8 Animal said:
Would Hafrauds sell them?
Yes
Sell what Paul? scratchchin
12 star socket well that's what i thought the post was referring to.
But you also could be winding me uppunch

WOO5IE

Original Poster:

967 posts

228 months

Wednesday 1st April 2009
quotequote all
Thanks guys for the replies

It was the Bi Hex socket that I was referring to.

Its not listed on Halfrauds web site though but they may stock it

I'll let you know if I find the oil leak. hope it's a minor issue


Trev

That Daddy

19,466 posts

252 months

Wednesday 1st April 2009
quotequote all
V8 Animal said:
That Daddy said:
V8 Animal said:
Would Hafrauds sell them?
Yes
Sell what Paul? scratchchin
12 star socket well that's what i thought the post was referring to.
But you also could be winding me uppunch
Sorry mate,its the later hehe

V8 Animal

6,015 posts

241 months

Wednesday 1st April 2009
quotequote all
That Daddy said:
V8 Animal said:
That Daddy said:
V8 Animal said:
Would Hafrauds sell them?
Yes
Sell what Paul? scratchchin
12 star socket well that's what i thought the post was referring to.
But you also could be winding me uppunch
Sorry mate,its the later hehe
thumbup

Mr Nordic

346 posts

266 months

Wednesday 1st April 2009
quotequote all
Halfs do do them, deep bi-hex 8mm socket £3.99 bought one last week for the same reason.

philmccann

430 posts

231 months

Thursday 2nd April 2009
quotequote all
Yep

Second that. Bought one at Halfrauds a while back, but still a complete PITA to get them out, especially along the driver's side where the coolant pipes are secured by the bolts as well. Once you get them out, as previously posted change 'em out for allen screws, and possibly invest in a set of long ball-ended keys to fit.You don't need them off very often (Hopefully!!) but for four screws what a chew on!!

HTH

Phil