Steering UJ's - to lube or not to lube that is the question.
Steering UJ's - to lube or not to lube that is the question.
Author
Discussion

Andy JB

Original Poster:

1,321 posts

250 months

Thursday 2nd April 2009
quotequote all
So whats the concensus with the two steering UJ's in terms of lubricating the joints and if so with what ? Should the joint be kept clean of grease?

Likewise covering them up with a flexible boot?

They do seem fairly exposed to picking up crud in their position & hence wear - can this be minimised?

CLN1

657 posts

256 months

Thursday 2nd April 2009
quotequote all
I wipe them clean once a year and then plaster them in new grease.

Colin.

Slacey

1,113 posts

245 months

Thursday 2nd April 2009
quotequote all
CLN1 said:
I wipe them clean once a year and then plaster them in new grease.
Me too, just done them recently in fact.

rev-erend

21,624 posts

315 months

Thursday 2nd April 2009
quotequote all
These used to cause MOT failures .. due to the joint seizing up .. I oil them - let it penetrate .. then grease.

Chassis 33

6,194 posts

313 months

Thursday 2nd April 2009
quotequote all
To be really posh you can remove the shaft from one end and slide a lenght of bicycle innertube around the UJ, liberal coating of grease everything back together and zip-tie the two ends shut.

Regards
Iain

Barkychoc

7,848 posts

235 months

Thursday 2nd April 2009
quotequote all
Chassis 33 said:
To be really posh you can remove the shaft from one end and slide a lenght of bicycle innertube around the UJ, liberal coating of grease everything back together and zip-tie the two ends shut.

Regards
Iain
Could you use a rack gaiter for a neater solution?

That Daddy

19,466 posts

252 months

Thursday 2nd April 2009
quotequote all
Barkychoc said:
Chassis 33 said:
To be really posh you can remove the shaft from one end and slide a lenght of bicycle innertube around the UJ, liberal coating of grease everything back together and zip-tie the two ends shut.

Regards
Iain
Could you use a rack gaiter for a neater solution?
Cant see why not,i just load with spray grease everytime its on the ramp not an issue really as i am a fair weather user hehe

Chassis 33

6,194 posts

313 months

Thursday 2nd April 2009
quotequote all
You're just showing off now wink

Regards
Iain

That Daddy

19,466 posts

252 months

Thursday 2nd April 2009
quotequote all
Chassis 33 said:
You're just showing off now wink

Regards
Iain
Sorry didn't mean to getmecoat