Eaton M90 in a Chim?
Discussion
Anyone does this, or seen it done, got any installation advice or pictures?
I was planning to go the SC Power route (SC400) but i'm selling my bike and someone's offered a brand new Eaton M90 + cash for my bike.
Any help/advice appreciated. I've seen the comments on the RPi site about mounting the M90 in the vee, but was wondering about mounting the M90 off to the side like the chap with the silver wedge.
HELP!
I was planning to go the SC Power route (SC400) but i'm selling my bike and someone's offered a brand new Eaton M90 + cash for my bike.
Any help/advice appreciated. I've seen the comments on the RPi site about mounting the M90 in the vee, but was wondering about mounting the M90 off to the side like the chap with the silver wedge.
HELP!
450Nick said:
Yep, that's what i was talking about:VerySideways said:
I've seen the comments on the RPi site about mounting the M90 in the vee
Anyone figured out how to mount the supercharger in such a way as to retain the standard plenum chamber?If not then i'm simply have to stick with the SC Power kit (with a Rotrex) though at the moment i am struglling to find someone to insure it...
Its a positive displacement charger isn't it? so wont be as smooth and progressive as the centrifugal Rotrex charger. but otherwise can be made to work.
Before SC-Power came along I had looked into a self install of an old skool roots or Wade blower and the two big issues were 1) fitting under the bonnet (you'll end up with a power bulge in bonnet if you fit it in the v.
2)The issue of driving it, there isn't enough space between the crank pulley and chassis cross member to fit the blower drive pulley without chassis mods. So that puts you down the route SC-Power went of driving it off of the existing Auxillary belt. Now you're in a whole new ball game of making a precision carrier bracket, and then ducting the pressurized air into the plenun etc. etc.
It'll end up costing you a heap load more than an off the shelf fix.
Before SC-Power came along I had looked into a self install of an old skool roots or Wade blower and the two big issues were 1) fitting under the bonnet (you'll end up with a power bulge in bonnet if you fit it in the v.
2)The issue of driving it, there isn't enough space between the crank pulley and chassis cross member to fit the blower drive pulley without chassis mods. So that puts you down the route SC-Power went of driving it off of the existing Auxillary belt. Now you're in a whole new ball game of making a precision carrier bracket, and then ducting the pressurized air into the plenun etc. etc.
It'll end up costing you a heap load more than an off the shelf fix.
Have you checked out this link Pete?
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
A.Mannings have checked out the SC-Power kit and will now insure it. The chap at Jelf Group was also happy to insure it.
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
A.Mannings have checked out the SC-Power kit and will now insure it. The chap at Jelf Group was also happy to insure it.
Edited by Bluebottle on Friday 3rd April 15:58
Nah, been with them for around 5 years. I was surprised when they said yes, as everyone else i spoke to got the same answer as you from them.
I guess they want to keep me as they are still trying to recoup their losses from my total loss claim 4 years ago
I guess they want to keep me as they are still trying to recoup their losses from my total loss claim 4 years ago

Edited by Bluebottle on Friday 3rd April 16:07
Chimjunkie said:
VerySideways said:
Well i just called them back and mentioned your name and the chap i spoke to is the guy who set your policy up so he's going to look into it on Monday and call me back.
..and then withdrawl Bluebottles cover!! 


I'm sure it won't stick too far out the bonnet tho;
http://www.youtube.com/watch?v=dkrgyfjJg3s&NR=...
http://www.youtube.com/watch?v=dkrgyfjJg3s&NR=...

Bluebottle said:
I'm sure it won't stick too far out the bonnet tho;
http://www.youtube.com/watch?v=dkrgyfjJg3s&NR=...
http://www.youtube.com/watch?v=dkrgyfjJg3s&NR=...

only in americaVerySideways said:
Anyone does this, or seen it done, got any installation advice or pictures?
I was planning to go the SC Power route (SC400) but i'm selling my bike and someone's offered a brand new Eaton M90 + cash for my bike.
Any help/advice appreciated. I've seen the comments on the RPi site about mounting the M90 in the vee, but was wondering about mounting the M90 off to the side like the chap with the silver wedge.
HELP!
An M90 is not big enough to work really well, but it is small enough to mount over #1,#3 headers and blow into a standard plenum. It would take a lot of work to fabricate the mounting brackets and ducts and upgrade the engine management system, so unless you understand how much work is involved and are prepared to do it yourself or pay someone to do it, a turnkey solution from somebody else will be a safer bet. There are no turnkey installations based on Eaton. Dennis Priddle uses Opcom now, which are similar size/capacity but more efficient (and more expensive). The centrefugal blowers don't produce the same flat stump-pulling torque curve but are a far easier installation and a lot more efficient, which makes it easier / safer to get more power without blowing the engine. I don't know how much you're being asked for the M90 but they are readily available for a couple of hundred quid - and budget a few years and a few thousand quid for a DIY installation or a few months and £5K or so for a professional one.I was planning to go the SC Power route (SC400) but i'm selling my bike and someone's offered a brand new Eaton M90 + cash for my bike.
Any help/advice appreciated. I've seen the comments on the RPi site about mounting the M90 in the vee, but was wondering about mounting the M90 off to the side like the chap with the silver wedge.
HELP!
Thanks Peter, that's all the information i needed in just one post. Perfect. And you clearly have a wealth of experience in this area.
So, that'll be a no to the M90 - which doesn't surprise me and doesn't bother me since i was already in contact with SC Power, though i am still working on the insurance issue.
Thanks again!
So, that'll be a no to the M90 - which doesn't surprise me and doesn't bother me since i was already in contact with SC Power, though i am still working on the insurance issue.
Thanks again!
VerySideways said:
though i am still working on the insurance issue.
This was the reason that 2 years ago i upgraded to a modified 500 rather than supercharge a 400. But many have added superchargers now and i would do this if i were to make the decision again now. Get in touch with those that have superchargers and ask about their insurance etc.Good luck.
Unless the 4.0 was already cross-bolted and using good pistons, the best advice is "don't start from here". Simply dropping in a bog standard 4.6 will give you far better bang-per-buck with no unusual technology required and minimal problems with insurance. And if you decide to add forced induction later, a good solid 4.6 is just about the best place you can start from (arguably better than a standard 500, for example).
Edited by GreenV8S on Saturday 4th April 13:37
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



