New Rad, couple of questions...
New Rad, couple of questions...
Author
Discussion

450Nick

Original Poster:

4,027 posts

243 months

Saturday 4th April 2009
quotequote all
Right, after noticing the car running a bit warmer than usual over the last few days, the cooling system was checked over and re-bled while I was over at SC-Power yesterday. Lots of air came out and lots of water went in and after the drive home, things were still hot and I noticed that the expansion tank level had diminished somewhat.

So I ran the car up to full temp today with the bonnet up and I noticed some steam coming out of the drivers side of the rad. Had a good look from inside the nose and its definitely leaking, and by a fair amount as well. This one has been re-cored twice by the previous owner so I've decided to go with a new rad, and an aluminium one to aid cooling since the charger has gone on.

I'm pretty sure I'll just stick a Radtec one in, but while I'm doing this I was going to move the fan control over to dual-stage on the Emerald, and was thinking about upgrading the fans to something like a pair of Kenlowe fans. I'm not sure this is really necessary though, especially with a alloy rad. My friend has a pair fitted to his pre-cat Griff though and I have to say they are quieter and quicker at bringing the temp down, so I'm sort of tempted. Is it worth it, or should I just re-use the old ones?

Bluebottle

3,498 posts

271 months

Saturday 4th April 2009
quotequote all
I had two recored rads leak on me too and fitted a Radtec in my Griff.
If you fit one I really don't think you need to spend on uprated fans as well Nick, if anything it over cools my car at this time of year with std fans.

Chimjunkie

2,879 posts

242 months

Saturday 4th April 2009
quotequote all
I used the Cerbera fans when i rebuilt the front end of mine. One of the two has significantly more flow.