jacking point??
jacking point??
Author
Discussion

Ikky's tvr

Original Poster:

24 posts

220 months

Saturday 4th April 2009
quotequote all
Hi anyone know how to jack up a chimaera!!! Wheres a safe point to do this, as need to change a punctured wheel. Also going to change all the alloys, just dont want to bend any chasis tubes!!! Thanx for answers guys!!

kenny Chim 4

1,604 posts

289 months

Saturday 4th April 2009
quotequote all
If front, use the triangular plate on the chassis outrigger behind the wheel. For the rear, it's in front of the wheel.

rigga

8,808 posts

232 months

Saturday 4th April 2009
quotequote all
Pad the jack plate,or use a piece of carpet so as to prevent damage to the chassis coating when jacking.....

Red V8

873 posts

258 months

Sunday 5th April 2009
quotequote all
I used the scissor jack a few months back on mine... placed on the outrigger close the the corner plate... works fine.

If you have a low profile trolley jack, then you can reach right into the square box section, although you'll find that you lift the entire front or back of the car at the same time.

If your outrigger is in good shape, then this shouldn't be a problem... if it isn't then changing the wheel is the least of your worries... you probably need to get it seen to.



rigga

8,808 posts

232 months

Sunday 5th April 2009
quotequote all
If im raising the rear at all for work on any side i do so by jacking under the diff....

locodude

510 posts

226 months

Sunday 5th April 2009
quotequote all
rigga said:
If im raising the rear at all for work on any side i do so by jacking under the diff....
Not such a good idea as all the weight of the car is taken on the diff bushes nono

Ikky's tvr

Original Poster:

24 posts

220 months

Sunday 5th April 2009
quotequote all
Thanx for the replies will do as soon as possible. The best way is probably on a ramp, like the ones in M.O.T garage.

rigga

8,808 posts

232 months

Sunday 5th April 2009
quotequote all
locodude said:
rigga said:
If im raising the rear at all for work on any side i do so by jacking under the diff....
Not such a good idea as all the weight of the car is taken on the diff bushes nono
If the bush's are affected by raising the car id say they are knackered anyway,the diff has to withstand loads far exceeding the body weight whilst the car is under power and braking through the drive train,so its not a problem as far as i can see..... if you have firm evidence otherwise id like to hear it to be proved wrong.

locodude

510 posts

226 months

Sunday 5th April 2009
quotequote all
Entirely up to you but they're not designed for it so why risk it?

rigga

8,808 posts

232 months

Sunday 5th April 2009
quotequote all
As i say,if you have firm evidence to suggest jacking the car by the diff is not recomended id be happy to be proved wrong,but the bush's purpose is to locate the diff to the chassis,allow some movement to take up drive line shock,but prevent excessive movement,so the diff is pretty well firmly attached to the chassis..... jacking the car up this way ive never had any issues with on any car....

HRG

72,863 posts

270 months

Sunday 5th April 2009
quotequote all
I always lift the front using the square section crossmember and a piece of wood to protect it (Griff).