Poly Bushes - Taken the plunge
Poly Bushes - Taken the plunge
Author
Discussion

lewis_sharman

Original Poster:

5,958 posts

222 months

Sunday 5th April 2009
quotequote all
Just ordered myself a full polybush set (3a) from Steve Heath including the ARB drop links and a few other goodies. I thought i may aswell get my wishbones done while the car was off the road (exhaust modification in process hehe ). So now the plan of action is to remove all wishbones, exhaust undertray, anti-roll bars, remove bushes, shot blast, powdercoat, polybush and put all back together with the new shiny exhaust and that is the only big job (that i know of) on the car that needs doing.

Then it will be off for a geometry and suspension set up and it should handle like a goodun thumbup

I will post before and after pics up here aswell

Any tips and/or experiences before i crack on with the work tomorrow?

CCM

3,521 posts

233 months

Sunday 5th April 2009
quotequote all
mine is also having bushes replaced on the rear wishbones next week and then a Geo set up to get all back in line as it should be.

lewis_sharman

Original Poster:

5,958 posts

222 months

Monday 6th April 2009
quotequote all
Quick question:

When i get the new wishbones powdercoated, will the new bushes fit in the bore with the powdercoat, or do i have to make sure the bores are free of powdercoat for the new bushes to fit?

shpub

8,507 posts

303 months

Monday 6th April 2009
quotequote all
Yes. The bushes will fit. Take the old bushes out of the wishbone, get it powder coated (including the bores) and then fit new bushes.

Mr Nordic

346 posts

266 months

Monday 6th April 2009
quotequote all
Hi Lewis,
What damping aree you going for?

lewis_sharman

Original Poster:

5,958 posts

222 months

Monday 6th April 2009
quotequote all
tbh i am not sure, i have yet to descide on how it will be set up.

I think i will take it down to Topcats for the geometry set up after i'm done.

The setup will definately be biased towards handling rather than comfort though

Chimjunkie

2,879 posts

242 months

Monday 6th April 2009
quotequote all
lewis_sharman said:
The setup will definately be biased towards handling rather than comfort though
That'll be much MUCH stiffer springs then hehe Hope things going ok Mr.

Jon

lewis_sharman

Original Poster:

5,958 posts

222 months

Tuesday 21st April 2009
quotequote all
Quick update to this:

All old bushes have been removed, wishbones and arb's are off to the powdercoaters atm, new bushes and drop links just arrived, and i have cleaned up all 4 corners of the chassis and cleaned up / repainted the hubs.

Just waiting for the powdercoating to be done and i can reassemble biggrin

This is where i am at:











Mr Nordic

346 posts

266 months

Wednesday 22nd April 2009
quotequote all
Lewis,

Your chassis is absolutely pukka.

lewis_sharman

Original Poster:

5,958 posts

222 months

Wednesday 22nd April 2009
quotequote all
Mr Nordic said:
Lewis,

Your chassis is absolutely pukka.
I should hope so, it was new in 2004 cool

And who says you can't get a good Chim for £6k! tongue out

Lets just hope i can keep it that way.

Edited by lewis_sharman on Wednesday 22 April 09:12

STEV8E

635 posts

240 months

Wednesday 22nd April 2009
quotequote all
Lewis,
Not that I like spending other peoples money! But is it not worth replacing the balljoints and rod ends while its in bits and before the geo?


Simon Says

19,466 posts

252 months

Wednesday 22nd April 2009
quotequote all
lewis_sharman said:
Mr Nordic said:
Lewis,

Your chassis is absolutely pukka.
I should hope so, it was new in 2004 cool

And who says you can't get a good Chim for £6k! tongue out

Lets just hope i can keep it that way.

Edited by lewis_sharman on Wednesday 22 April 09:12
Do away with those stty brake hoses while your at it whistle keep up the good work thumbup

lewis_sharman

Original Poster:

5,958 posts

222 months

Wednesday 22nd April 2009
quotequote all
I am leaving the brakes for now, i just want the car back on the road atm frown

But when i come to do the brakes in the next few months the hoses will definately be changed to braided!

lewis_sharman

Original Poster:

5,958 posts

222 months

Wednesday 22nd April 2009
quotequote all
STEV8E said:
Lewis,
Not that I like spending other peoples money! But is it not worth replacing the balljoints and rod ends while its in bits and before the geo?
I had'nt really looked into this tbh, i did check the rest of the steering parts and joints and they all seem pretty solid. But you do throw up a good point of 'while its apart, i may aswell . . . ' (i replaced the fuel filter aswell yesterday - i can't see how people can do that without taking the suspension off!)

Where abouts can you get the balljoints and rod ends from?

And any more suggestions while access is good? thumbup

WOO5IE

968 posts

228 months

Wednesday 22nd April 2009
quotequote all
Hi Lewis

This place TVR supplies I believe is the cheapest for these parts and no VAT

1 pair lower ball joints=£28.99
1 pair upper ball joints=£34.99
1 pair t/rod ends =£16.99

email tvrsupplies@tiscali.co.uk

His name is Mike and he is a PHer and I think its AJPGrif

Trev

Site Address: http://www.tvrsupplies.co.uk/




Edited by WOO5IE on Wednesday 22 April 14:31

STEV8E

635 posts

240 months

Wednesday 22nd April 2009
quotequote all
I have just bought lower ball joints from TVR supplies. I dont think Mike does the uppers anymore so I bought them from Clever Trevor. However TVR supplies do not do the bolts for the lowers but Clever Trevor does so I got them from there.... still with me. biggrin

Lewis, I did the fuel filter in October as part of the 12,000 service (got the kit from Mike) yeah what a PITA

MrPhotographer

155 posts

214 months

Wednesday 22nd April 2009
quotequote all
Fair play to you mate, chassis looks great and to be doing all that yourself too. I struggled just the other day putting the handbrake lever back on lol!

T.


HRG

72,863 posts

270 months

Wednesday 22nd April 2009
quotequote all
STEV8E said:
I have just bought lower ball joints from TVR supplies. I dont think Mike does the uppers anymore so I bought them from Clever Trevor. However TVR supplies do not do the bolts for the lowers but Clever Trevor does so I got them from there.... still with me. biggrin

Lewis, I did the fuel filter in October as part of the 12,000 service (got the kit from Mike) yeah what a PITA
Mike definitely did uppers about a year ago, I got mine from there. Bolts for lowers are just std m8 affairs.

Chimjunkie

2,879 posts

242 months

Wednesday 22nd April 2009
quotequote all
Quinny said:
lewis_sharman said:
Any tips and/or experiences before i crack on with the work tomorrow?
Yephehe





Do these jobs in the Winterhehethumbup
Good tip hehehehe


HRG

72,863 posts

270 months

Wednesday 22nd April 2009
quotequote all
Chimjunkie said:
Quinny said:
lewis_sharman said:
Any tips and/or experiences before i crack on with the work tomorrow?
Yephehe





Do these jobs in the Winterhehethumbup
Good tip hehehehe
And get a four post lift...