Sudden cutting out
Sudden cutting out
Author
Discussion

Karussell

Original Poster:

157 posts

275 months

Sunday 5th April 2009
quotequote all
Good afternoon everybody,

Can anyone guide me in the right direction for this problem that has suddenly developed

Yesterday, just driving down the slip road onto the M54, giving it a few beans, and just lost all engine power. Coast onto slip road, try and restart, engine turns over, all the dash lights on, but will not fire. The rev counter needle is resting on stop, without a flicker when turning over. Does this suggest a coil problem? Managed to flatten battery, get recovered home paperbag , and put battery on charge.

Give it an hour, and fires up straight away. Let it sit on drive with the fans kicking in and out, and no apparent problem.

I have checked and changed the 100A big fuse, but would appreciate some help on the most logical process of elimination plan

Thanks

K

Blown2CV

31,662 posts

234 months

Sunday 5th April 2009
quotequote all
Inability to restart could be the hot start issue, see Modwise for a fix kit... but that doesn't explain the cutting out in the first place, which would need dealing with first as it may sort the inability to restart in any case.

Karussell

Original Poster:

157 posts

275 months

Sunday 5th April 2009
quotequote all
Hi,

Had the car 6 years, and it has never let me down, or behaved erratically, ever.

I am thinking that it is the coil, or the ignition amplifier(what ever that is!).

It is the fact that it seems to "self correct" that is bizarre. Due to this I feel quite confirdant that it is not a fuse, or a loose HT lead etc, as when it runs, there is no sign of anything untoward

K

chimalsu

279 posts

269 months

Sunday 5th April 2009
quotequote all
i had same problem,a new petrol filter cured mine

blitzracing

6,422 posts

251 months

Sunday 5th April 2009
quotequote all
The ignition amp / trigger is the most likely suspect. It connects to the negative side of the coil and feeds a signal to both the rev counter and ECU. No signal to the ECU means the fuel pump stops, so you do to ! A new amp is about £25.

Karussell

Original Poster:

157 posts

275 months

Sunday 5th April 2009
quotequote all
Thanks Blitzracing,

Would the ignition amp be an intermittent problem? What seems strange is that when it cut out, it fired up straight away once I put some charge in the battery. I have been tinkering today, and it has fired up and run 5 or six times without issue. Haven't had the confidance to go for a spin tho! until I can pinpoint and solve the gremlin

K

paulathome

686 posts

249 months

Sunday 5th April 2009
quotequote all
It's usually the heat which kills the coil and ignition amp. By the time you got home everything will have cooled down and works again. Had similar issue in the past and a new ignition amp and coil cleared the fault.
Paul.

Karussell

Original Poster:

157 posts

275 months

Sunday 5th April 2009
quotequote all
Thanks for the input guys.

I will get some bits ordered and get them fitted over the Easter weekend

K

Cider Andy

1,889 posts

256 months

Monday 6th April 2009
quotequote all
As it's intermittent I'd check the lucar connectors to the LT side of the coil first: you may find the ignition amp is fine.

Seasider

12,728 posts

280 months

Monday 6th April 2009
quotequote all
Cider Andy said:
As it's intermittent I'd check the lucar connectors to the LT side of the coil first: you may find the ignition amp is fine.
& All the LT wires ....

nawarne

3,181 posts

291 months

Monday 6th April 2009
quotequote all
Karussell said:
Thanks Blitzracing,

Would the ignition amp be an intermittent problem? What seems strange is that when it cut out, it fired up straight away once I put some charge in the battery. I have been tinkering today, and it has fired up and run 5 or six times without issue. Haven't had the confidance to go for a spin tho! until I can pinpoint and solve the gremlin

K
The ignition amp is definitely affected by the high under bonnet temps.
On my V8S with the amp attached to the side of the dissy, it would fail as per your description on a regular basis.

On the Chim, with the amp removed to a plate above the coil, it seems to survive much better....but I guess they will/may all fail in time.

Nick.

Karussell

Original Poster:

157 posts

275 months

Monday 6th April 2009
quotequote all
Thanks for the feedback.

The LT wire connectors were a little loose and I have nipped them up (less than 1/4 turn on the nut)
Is there anyway of checking the ignition amp and coil before I go down the route of changing them?

Cheers

K

Seasider

12,728 posts

280 months

Monday 6th April 2009
quotequote all
Check the LT wires wink

MADMAX2

2,336 posts

225 months

Monday 6th April 2009
quotequote all
Karussell said:
Thanks for the feedback.

The LT wire connectors were a little loose and I have nipped them up (less than 1/4 turn on the nut)
Is there anyway of checking the ignition amp and coil before I go down the route of changing them?

Cheers

K
exact same thing happened to me last weds and checked there was power to the coil and there was none so i didnt have a spark at the plugs either changed the ignition amp and voila! all is good

Karussell

Original Poster:

157 posts

275 months

Wednesday 6th May 2009
quotequote all
Just thought I would resurrect this thread.

I have changed the ignition module and coil, courtesy of TVR Power, and the problem is solved.

Just to make sure, went for late night hoon up the M54 and A5 towards Wales

Total cost to fix £60

Midnight.
Pitch black.
Dual carriageway for 7-8 miles or so,virtually dead straight with no junctions
Highway To Hell
1.5 leptons

Priceless

K