Sleeved Exhaust
Discussion
Hello all,
I know there's been numerous discussions on this but just wanted to check a couple things.
I want to get my exhaust sleeved - And from another post I believe this involves cutting open the silencer box, and wrapping (or replacing) the baffled pipe with a straight through pipe, stuffing the wadding back in to avoid tinnyness, then refitting the modified silencer.
I've spoken to 2 custom exhaust places around Bristol and both said they wouldn't do that, they would just cut out the box and replace said cut section with a straight through pipe.
All this leaves me a bit confused as to the differences. Why is sleeving done at all when surely it is easier to cut and replace box with pipe instead of messing around opening up silencer boxes?
Or is there some advantage in tone in leaving an essentially pointless silencer box on the exhaust after sleeving!?
I just want what is going to sound best and if that involves leaving the 'dead' box on there then fine - I will but surely there is also a weight advantage too by getting rid of the dead box?
Is there a chance of power loss by doing either of these mods?
Also please advise if anyone has had a 'sleeve' done as opposed to a 'chop and pipe'
Cheers
Ryan
Seeving the pipe, generally means that they take out the perforated pipe and replace it with a straight/solid piece of pipe. There's very little point in wrapping the original pipe.
The system is a "straight through" as in there are no baffles or plates in the system, so there should be no loss of power.
Sound wise it's up to you. Personally I don't like the solid pipe sound as I think it makes the car sound a bit agricultral at low revs.
Some people have the box opened and Bullet type silencers or "Cherry Bombs" fitted, which give a different type of sound.
If you do have it cut open, be sure to make sure they put the wadding back in.
I have the Ptototype ACT SS Cherry Bomb system on my car. Do a search for ACT on PHTV and you can hear it. It's pleasant crusing, but nice and loud on accelleration.
The system is a "straight through" as in there are no baffles or plates in the system, so there should be no loss of power.
Sound wise it's up to you. Personally I don't like the solid pipe sound as I think it makes the car sound a bit agricultral at low revs.
Some people have the box opened and Bullet type silencers or "Cherry Bombs" fitted, which give a different type of sound.
If you do have it cut open, be sure to make sure they put the wadding back in.
I have the Ptototype ACT SS Cherry Bomb system on my car. Do a search for ACT on PHTV and you can hear it. It's pleasant crusing, but nice and loud on accelleration.
ive just had mine done , removed the silencer box completly and had fitted two hand made cherry bombs then they fabricted all the brackets as the silencer box is not used .it sounds like the act sports exhaust with out the cost .cost me just over £200 and worth every penny .trouble is i had the conversion done in nottingham and the guy does them on saturdays .its raspy and sounds fantastic when flooring it but its quiet when cruising.
Edited by daz the plumber on Tuesday 7th April 14:36
Edited by daz the plumber on Tuesday 7th April 14:54
hi, i had a sleeved exaust on my chim when i bought it & it was very loud, the reason for leaving the silencer in place & sleeving it is so that it looks like its got a silencer on it if you get stopped by the bib for being noisey & for when you have to take the car for its mot. ive now replaced mine with the act cherrybomb system as it was upsetting the neighbours before! the act system makes it sound alot deeper on idle & still gets very loud when you get your foot down!
locodude said:
im said:
Wildfire said:
If you do have it cut open, be sure to make sure they put the wadding back in.
Sorry - can't agree.I dont have the wading and indeed Austec Racing in Crawley who do this conversion (and have done lots of them) dont put the wading back - nor to does a certain independant TVR specialist I know put the wading back.
I suppose if you've got ears like some kind of high-end sampling device you might hear a difference but to the average bloke in the street its not discernable.
IMHO
im said:
locodude said:
im said:
Wildfire said:
If you do have it cut open, be sure to make sure they put the wadding back in.
Sorry - can't agree.I dont have the wading and indeed Austec Racing in Crawley who do this conversion (and have done lots of them) dont put the wading back - nor to does a certain independant TVR specialist I know put the wading back.
I suppose if you've got ears like some kind of high-end sampling device you might hear a difference but to the average bloke in the street its not discernable.
IMHO
My tip to the OP, have a listen to a few cars and decide which you prefer.
I had the wadding taken out on my first Chim, and certainly it was a little more metallic, but did roar rather more. On my current one I couldn't be bothered so had the entire unit cut out and replaced with a single pipe for "true" straight-through. Oh, and ACT manifolds.... so it's noisy. Very noisy. Not quite on the level of my old Cerbera, but noisy enough for me 

Ive just had my exhaust sleeved, i cut open the box myself, removed the wadding and old silencers, got a local metalworker to weld in two pieces of pipe, replace wadding and weld back up 
Have yet to fit it to the car as atm i am removing the wishbones for powdercoating and the polybushes are going in. When its all back together i will get a vid and post it up.
ETA pics




Have yet to fit it to the car as atm i am removing the wishbones for powdercoating and the polybushes are going in. When its all back together i will get a vid and post it up.
ETA pics




Edited by lewis_sharman on Tuesday 7th April 22:43
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


