rolling road session
Discussion
I had a rolling road session yesterday just to see how the car is running after a winter of fettling , up grades and a good service and my result was good it is running like a watch i have 186bhp at the rear wheels according to his rollers up from the 182 last year.
Only changed to a smooth bore elbow. The engine has no more to give in its standard state which makes me happy it runs spot on.
Only problem i still think it uses too much fuel on a run(not heavy right foot) i think the cam could have been changed to a wilder one before i owned the car as it is quite shunty for a 400 at low speeds could this affect fuel consumption? And my peak power comes in at above 5500 rpm?
Is this the norm for a 400? Not complaining just curious
Cheers Scotty
Only changed to a smooth bore elbow. The engine has no more to give in its standard state which makes me happy it runs spot on.
Only problem i still think it uses too much fuel on a run(not heavy right foot) i think the cam could have been changed to a wilder one before i owned the car as it is quite shunty for a 400 at low speeds could this affect fuel consumption? And my peak power comes in at above 5500 rpm?
Is this the norm for a 400? Not complaining just curious
Cheers Scotty
Edited by scotty_d on Thursday 9th April 10:33
I recently had my standard 400 on the rollers, it made 177 BHP at the wheels & 229 BHP at the flywheel, so I guess yours is doing very well.
Max power was achieved at 5670 RPM
Did you get a print out of A/F ratio? If so what figures did you get? I am chasing a rich running issue. mine varied between 12 & 11.5 from 2000 to the rev limiter.
Andy
Max power was achieved at 5670 RPM
Did you get a print out of A/F ratio? If so what figures did you get? I am chasing a rich running issue. mine varied between 12 & 11.5 from 2000 to the rev limiter.
Andy
scotty_d said:
Seems normal then that peak power is high up rev band, cool a Excuse to rev it.
Power in BHP is Torque / 5252 X RPM (so torque and power will always be the same at 5252rpm) Where your peak power comes depends on the torque curve.Edited by scotty_d on Thursday 9th April 10:50
scotty_d said:
I had a rolling road session yesterday just to see how the car is running after a winter of fettling , up grades and a good service and my result was good it is running like a watch i have 186bhp at the rear wheels according to his rollers up from the 182 last year.
Only changed to a smooth bore elbow. The engine has no more to give in its standard state which makes me happy it runs spot on.
Only problem i still think it uses too much fuel on a run(not heavy right foot) i think the cam could have been changed to a wilder one before i owned the car as it is quite shunty for a 400 at low speeds could this affect fuel consumption? And my peak power comes in at above 5500 rpm?
Is this the norm for a 400? Not complaining just curious
Cheers Scotty
Scotty,lurching is not necessarily the by product of a spiky cam,some suffer more than others purely on the fact the RV8 runs on the ragged edge air/fuel ratio wise at low RPM,do a search for posts from Blitzracing and you will get a better idea of what's going on and why to cause the dreaded lurch,nice power output by the way Only changed to a smooth bore elbow. The engine has no more to give in its standard state which makes me happy it runs spot on.
Only problem i still think it uses too much fuel on a run(not heavy right foot) i think the cam could have been changed to a wilder one before i owned the car as it is quite shunty for a 400 at low speeds could this affect fuel consumption? And my peak power comes in at above 5500 rpm?
Is this the norm for a 400? Not complaining just curious
Cheers Scotty
Edited by scotty_d on Thursday 9th April 10:33
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



