Door Mirror Question
Discussion
Is it possible to replace the internal metal frame that's rivetted (sort of) into the plastic casing ? If so anyone know where they can be bought, and how the frame is detached/reattached without damaging the plastic?
My only other option is a whole new mirror + spray paint. And the cheapest I can find is ~£120, except for possibly Brodie Engineering and they are not picking up the phone for the past few days :/ Don't know if the Citroen dealers stock the CX mirrors but all their parts depts are shut. Gaa!
Thanks
My only other option is a whole new mirror + spray paint. And the cheapest I can find is ~£120, except for possibly Brodie Engineering and they are not picking up the phone for the past few days :/ Don't know if the Citroen dealers stock the CX mirrors but all their parts depts are shut. Gaa!
Thanks
Edited by winters on Saturday 11th April 13:56
Hi, I've done this fairly recently (this year), it's fairly straight forward, the biggest pain is removing the mirror from the car in the first place as you have to take the electrical connector block off the mirror wiring.
As for taking them apart and rebuilding - not difficult at all, they're not riveted together, it's a sort of locking washer, not sure of the correct name. You can carefully prize these off - be careful with both your original mirror and your new one as you'll probably break a couple of them, they're normally a bit rusty. You should be able to keep enough of them to put one good mirror back together.
Your best bet if you're going to rebuild is to source a CX mirror - don't bother with Citroen direct, get on ebay and google, you'll be able to find one for between 30-45 pounds, a much cheaper option plus you don't have to paint. Took me about 30 mins plus a couple of phone calls to locate two. I bought both and sold the other on to another PHer who needed one for just what it cost me. Unfortunately I don't have the contact details or I gladly pass them on. Look for people breaking CX's on ebay too.
When I replaced it I took the whole of the door apart, which you don't need to do. Just fetch the speaker out, trace the wiring down from the mirror to the connector with your hand and undo from there. You can just unscrew the mirror from the outside using the mounting post if you're mirror is already broken.
Hope that helps
Simon
As for taking them apart and rebuilding - not difficult at all, they're not riveted together, it's a sort of locking washer, not sure of the correct name. You can carefully prize these off - be careful with both your original mirror and your new one as you'll probably break a couple of them, they're normally a bit rusty. You should be able to keep enough of them to put one good mirror back together.
Your best bet if you're going to rebuild is to source a CX mirror - don't bother with Citroen direct, get on ebay and google, you'll be able to find one for between 30-45 pounds, a much cheaper option plus you don't have to paint. Took me about 30 mins plus a couple of phone calls to locate two. I bought both and sold the other on to another PHer who needed one for just what it cost me. Unfortunately I don't have the contact details or I gladly pass them on. Look for people breaking CX's on ebay too.
When I replaced it I took the whole of the door apart, which you don't need to do. Just fetch the speaker out, trace the wiring down from the mirror to the connector with your hand and undo from there. You can just unscrew the mirror from the outside using the mounting post if you're mirror is already broken.
Hope that helps
Simon
It's possible to repair the mirror frame, depending on how it has broken. There's a good picture here of a TVRCC member's repair.
If you carefully remove the retaining spring clips (by 'carefully' I mean by sacrificing the clips to keep the plastic studs intact), you can replace them with nuts (metric, I've forgotten the size) that will cut their own threads into the plastic.
If you carefully remove the retaining spring clips (by 'carefully' I mean by sacrificing the clips to keep the plastic studs intact), you can replace them with nuts (metric, I've forgotten the size) that will cut their own threads into the plastic.
Cheers guys. I'll try to replace the frame and avoid the respray/possible colour match problems. Andy unfortunately I think it is broken in such a way that it can't be patched up per your picture - but thanks for the suggestion. What a pain - haven't been able to drive the car on this long weekend!
Nige.
Nige.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


