16 inch Estorils on the Front,what tyre size?
Discussion
Hi,
Have the same set up on my 98 450 Chim and also have Toyo's on all corners. Will check in the morning the size on the front though I did need to fit the stops as the rim not the tyre on the nearside fouled the anti roll bar on full lock. Fitting the stops took about an hour and as the Merekat says "Simples.....
".
Back soon.
Have the same set up on my 98 450 Chim and also have Toyo's on all corners. Will check in the morning the size on the front though I did need to fit the stops as the rim not the tyre on the nearside fouled the anti roll bar on full lock. Fitting the stops took about an hour and as the Merekat says "Simples.....
".Back soon.
Just done the same on mine 225/45/16 on the front and 245/45/16 on the rear with 3mm spacers on the front to avoid rubbing. Got some useful info here
http://www.pistonheads.com/xforums/topic.asp?h=0&a... 16" wheels on the front.&mid=32861
http://www.pistonheads.com/xforums/topic.asp?h=0&a... 16" wheels on the front.&mid=32861
6407N said:
Thanks for all the information,I shall try the spacers first and then rack stops.
Much obliged....
You don't need the spacers for the wheels to fit and you might not need the rack stops either, fit the wheels first then check to see if you're happy with the very slight inset (it 'ain't really noticeable) and if the wheels foul the suspension on full lock only then do you know if you need either.Much obliged....
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


