service intervals
Discussion
The 6k mile intervals are not short for an engine designed in the 1950s and run in a relatively high state of tune.
The other components tend to be more highly stressed (brakes/chassis/shocks etc) and so require regular checks to ensure they will contine to perform under the high stresses that they are run.
You could just ignore the service intervals and wait until something breaks but it could break you!
The other components tend to be more highly stressed (brakes/chassis/shocks etc) and so require regular checks to ensure they will contine to perform under the high stresses that they are run.
You could just ignore the service intervals and wait until something breaks but it could break you!
jdl1981 said:
Does anyone know why the service intervals are so short? I had a service in December and because it is my only car, it will be due another very soon.
Cos its a performance car! Might be cheaper to get a second car for everyday use than to keep the Tiv in the road doing those kind of miles...Tyre_Tread said:
The 6k mile intervals are not short for an engine designed in the 1950s and run in a relatively high state of tune.
The other components tend to be more highly stressed (brakes/chassis/shocks etc) and so require regular checks to ensure they will contine to perform under the high stresses that they are run.
You could just ignore the service intervals and wait until something breaks but it could break you!
It will certainly get serviced when the 6k miles are up, i wouldn't run the risk of not having it done, it's just expensive to keep the TVR service history up!The other components tend to be more highly stressed (brakes/chassis/shocks etc) and so require regular checks to ensure they will contine to perform under the high stresses that they are run.
You could just ignore the service intervals and wait until something breaks but it could break you!
jdl1981 said:
Tyre_Tread said:
The 6k mile intervals are not short for an engine designed in the 1950s and run in a relatively high state of tune.
The other components tend to be more highly stressed (brakes/chassis/shocks etc) and so require regular checks to ensure they will contine to perform under the high stresses that they are run.
You could just ignore the service intervals and wait until something breaks but it could break you!
It will certainly get serviced when the 6k miles are up, i wouldn't run the risk of not having it done, it's just expensive to keep the TVR service history up!The other components tend to be more highly stressed (brakes/chassis/shocks etc) and so require regular checks to ensure they will contine to perform under the high stresses that they are run.
You could just ignore the service intervals and wait until something breaks but it could break you!

Most things are strighforward if a little awkward. Much easier if you have a decent size garage to work in which I now have (at last).
Tyre_Tread said:
jdl1981 said:
Tyre_Tread said:
The 6k mile intervals are not short for an engine designed in the 1950s and run in a relatively high state of tune.
The other components tend to be more highly stressed (brakes/chassis/shocks etc) and so require regular checks to ensure they will contine to perform under the high stresses that they are run.
You could just ignore the service intervals and wait until something breaks but it could break you!
It will certainly get serviced when the 6k miles are up, i wouldn't run the risk of not having it done, it's just expensive to keep the TVR service history up!The other components tend to be more highly stressed (brakes/chassis/shocks etc) and so require regular checks to ensure they will contine to perform under the high stresses that they are run.
You could just ignore the service intervals and wait until something breaks but it could break you!

Most things are strighforward if a little awkward. Much easier if you have a decent size garage to work in which I now have (at last).
jdl1981 said:
Tyre_Tread said:
jdl1981 said:
Tyre_Tread said:
The 6k mile intervals are not short for an engine designed in the 1950s and run in a relatively high state of tune.
The other components tend to be more highly stressed (brakes/chassis/shocks etc) and so require regular checks to ensure they will contine to perform under the high stresses that they are run.
You could just ignore the service intervals and wait until something breaks but it could break you!
It will certainly get serviced when the 6k miles are up, i wouldn't run the risk of not having it done, it's just expensive to keep the TVR service history up!The other components tend to be more highly stressed (brakes/chassis/shocks etc) and so require regular checks to ensure they will contine to perform under the high stresses that they are run.
You could just ignore the service intervals and wait until something breaks but it could break you!

Most things are strighforward if a little awkward. Much easier if you have a decent size garage to work in which I now have (at last).
Tyre_Tread said:
jdl1981 said:
Tyre_Tread said:
jdl1981 said:
Tyre_Tread said:
The 6k mile intervals are not short for an engine designed in the 1950s and run in a relatively high state of tune.
The other components tend to be more highly stressed (brakes/chassis/shocks etc) and so require regular checks to ensure they will contine to perform under the high stresses that they are run.
You could just ignore the service intervals and wait until something breaks but it could break you!
It will certainly get serviced when the 6k miles are up, i wouldn't run the risk of not having it done, it's just expensive to keep the TVR service history up!The other components tend to be more highly stressed (brakes/chassis/shocks etc) and so require regular checks to ensure they will contine to perform under the high stresses that they are run.
You could just ignore the service intervals and wait until something breaks but it could break you!

Most things are strighforward if a little awkward. Much easier if you have a decent size garage to work in which I now have (at last).
If someone did decide to show a select group of 'friends' around a Chim and how to do some of the work yourself then what sort of things would you like to know how to do?
Oil and filter change?
Brake pads & discs?
Distributer cap, leads and plugs?
Axle top up?
Gearbox oil change?
Any of the above and what else?
Oil and filter change?
Brake pads & discs?
Distributer cap, leads and plugs?
Axle top up?
Gearbox oil change?
Any of the above and what else?
lesstatt said:
No i think that would about cover the basics without going too deep and putting people off
OK, had a think about this. If I said a max of 4 people at a time with the day split into 2 halves.Morning
Basics: inc looking at a stripped down engine to explain regularly talked about parts that you may never have seen. e.g Pistons, Crankshaft, cam shaft, valves etc
Oil and filter change?
Distributer cap,
leads and plugs?
100amp fuse - how to check & replace
Afternoon:
stepper motor remove & clean
Brake pads & discs?
Axle top up?
Gearbox oil change?
Would anyone be interested in this if I said maybe £25 per half day inc bacon butties at lunch time and tea and coffee along the way.
Bear in mind this would be in my own (albeit large) garage with no fancy equipment
like car lifts but using the sort of equipment that you can buy relatively cheaply.
We could even get someone to do the work on their own car under supervision so that you get some hands on experience rather than just watching. There's nothing that builds confidence nore than actually doing the job yourself.
If there's an inkling of interest I'll open up a dedicated thread.
I'm based right in the middle of the country just where the M1 and M6 meet.
Tyre_Tread said:
lesstatt said:
No i think that would about cover the basics without going too deep and putting people off
OK, had a think about this. If I said a max of 4 people at a time with the day split into 2 halves.Morning
Basics: inc looking at a stripped down engine to explain regularly talked about parts that you may never have seen. e.g Pistons, Crankshaft, cam shaft, valves etc
Oil and filter change?
Distributer cap,
leads and plugs?
100amp fuse - how to check & replace
Afternoon:
stepper motor remove & clean
Brake pads & discs?
Axle top up?
Gearbox oil change?
Would anyone be interested in this if I said maybe £25 per half day inc bacon butties at lunch time and tea and coffee along the way.
Bear in mind this would be in my own (albeit large) garage with no fancy equipment
like car lifts but using the sort of equipment that you can buy relatively cheaply.
We could even get someone to do the work on their own car under supervision so that you get some hands on experience rather than just watching. There's nothing that builds confidence nore than actually doing the job yourself.
If there's an inkling of interest I'll open up a dedicated thread.
I'm based right in the middle of the country just where the M1 and M6 meet.
spend said:
Not wishing to discourage your initiative, but aren't there reasonable local college courses on car maintenance for beginners/intermediates? I seem to recall several PH'ers waxing lyrical about courses in Workshop in the not too distant past..
There are but they tend to be very general rather than model specific.I was just wondering if it would be helpful. If not then I won't bother. Simples! (chirp)
im said:
I've been thinking about getting more hands-on so this is a very interesting idea - dependent upon date/time (as I'm at the bottom of the country) I'd be interested to come along.
Could be a fun day - would you want us to bring some tools (socket set etc)?
depending upon interest levels I may run more than one. Could be a fun day - would you want us to bring some tools (socket set etc)?
Probably better not to bring tools otherwise we'll end up with thousands. I have a basic but extensive tool kit and would propose to use that.
If there is interest I can ask around at some local hostelries to source some cheap overnight accomodation.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


