Chassis condition
Discussion
What is the point that a chassis is kaput? I had my car jacked up today to try and locate a tapping noise and noticed the outriggers and the outside runners have surface rust on them.
I prodded it all with a screwdriver and its still strong but it looks nasty.
Does anyone have pictures of a good example and a really bad one?
Cheers
I prodded it all with a screwdriver and its still strong but it looks nasty.
Does anyone have pictures of a good example and a really bad one?
Cheers
Edited by Whiplash on Monday 13th April 12:10
I think as long as it's not holed then you are OK. If you have surface rust then it sounds like the poweder coat has been breached and you will need to do clean it up and reprotect it soon.
Mine had surface rust and the pwder coat was starting to lift so I stripped and repainted them over the winter. If you check out the Griffith forum there were several of us doing this over the winter with varying levels of rust.
My thread
Baretti's thread
Mine had surface rust and the pwder coat was starting to lift so I stripped and repainted them over the winter. If you check out the Griffith forum there were several of us doing this over the winter with varying levels of rust.
My thread
Baretti's thread
Baretti and Colin I
before you both.
Thanks for the info. It looks like I will wax the Chassis for now but I found this on the Chimaera Pages.
As soon as I know the price I will strongly consider it.
http://www.chimaerapages.com/newchassis.php
before you both. Thanks for the info. It looks like I will wax the Chassis for now but I found this on the Chimaera Pages.
As soon as I know the price I will strongly consider it.
http://www.chimaerapages.com/newchassis.php
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


