What Engine does the Chimaera 4.0L have
What Engine does the Chimaera 4.0L have
Author
Discussion

Manolis

Original Poster:

24 posts

283 months

Tuesday 14th April 2009
quotequote all
Guys which Rover engine does the chimaera have. On which Rover is used?

spend

12,581 posts

282 months

Tuesday 14th April 2009
quotequote all
A TVR 4.0 engine

Evo

3,462 posts

285 months

Tuesday 14th April 2009
quotequote all
Take your pick, i think the engine (with Rover) started in the P1 and then continued into the SD1. HTH

Manolis

Original Poster:

24 posts

283 months

Tuesday 14th April 2009
quotequote all
isnt this engine on Range Rovers. if yes what, do you know which year?

Benjaminpalma

1,214 posts

213 months

Tuesday 14th April 2009
quotequote all
I think it's used on the Land Rover Discovery, but I stand to be corrected...

MADMAX2

2,336 posts

225 months

Tuesday 14th April 2009
quotequote all
spend said:
A TVR 4.0 engine
really??????????????????????????

hehe

haircutmike

22,511 posts

235 months

Tuesday 14th April 2009
quotequote all
Same engine as disco 1, 3.9, or 4.0 rangie, (same engine, renamed 4.0 but cc the same!).
TVR used basic engine, uprated it and remapped the ecu.

P.

jdl1981

299 posts

214 months

Tuesday 14th April 2009
quotequote all
What did TVR do to uprate the engine? Was it just a change of cam?

daz the plumber

14,997 posts

262 months

Tuesday 14th April 2009
quotequote all
well it as standard heads , standard plenum ,trumpet base, inlet manifold .the cam is different and the hc as stronger valve springs concave pistons and a higher lift cam .the fueling chip in the ecu is remapped .was told the the pre cats and 4.3 big valve were modified and the wedges .think they were selling a large volums of chimaeras so the engines were just purchased as a turn key engine and not built in house not like the early cars .remember you have a large engine in a light car .

Edited by daz the plumber on Tuesday 14th April 23:44

jdl1981

299 posts

214 months

Tuesday 14th April 2009
quotequote all
daz the plumber said:
well it as standard heads , standard plenum ,trumpet base, inlet manifold .the cam is different and the hc as stronger valve springs concave pistons and a higher lift cam .the fueling chip in the ecu is remapped .was told the the pre cats and 4.3 big valve were modified and the wedges .think they were selling a large volums of chimaeras so the engines were just purchased as a turn key engine and not built in house not like the early cars .remember you have a large engine in a light car .

Edited by daz the plumber on Tuesday 14th April 23:44
Cheers mate, i was just wondering what they did with them or if they just left them standard

spend

12,581 posts

282 months

Wednesday 15th April 2009
quotequote all
All have concave pistons, I think (hope?) he meant valve reliefs in the pistons of the higher cam versions.

TVR also always used composite head gaskets instead of tin, which if you do your sums means they had to skim something even to retain LR piss poor compression. Since they all run on high octane might give you a clue that somethings were done to the basic engine geometry.

When do you decide they are they are different engine? Want to be a saint or sinner??????

Tyre_Tread

10,697 posts

247 months

Wednesday 15th April 2009
quotequote all
First fitted by Rover to this :

The Rover P5.

Then the P6, Range Rover, Land Rover, SD1, Sherpa Van and a myriad of other stuff in various states of tune.

It was originally a Buick design that thye dropped and Rover bought the rights and modified it substantially including the manufacturing process.

spend

12,581 posts

282 months

Wednesday 15th April 2009
quotequote all
Tyre_Tread said:
It was originally a Buick design that thye dropped and Rover bought the rights and modified it substantially including the manufacturing process.
..but originally rumoured to have been 'liberated' as reparation from Munich in the late 40's.;)


dmmancini

22 posts

212 months

Wednesday 15th April 2009
quotequote all
I never heard the reparation story, it was designed by GM bu proved too small for the giant US cars, was also used in marine applications in the US and the rights were sold to BL. In any case the 400 looks identical to that in my 3.9 Range Rover Classic. The 4.0 Range Rover as used in the p38 model, (1995-2002), was based on the same engine but very different again as the castings were improved and strengthened with external webbing. I suspect the same engines were used in Discovery and and the rare V8 Defender model.

LordGrover

34,191 posts

243 months

Wednesday 15th April 2009
quotequote all
Manolis said:
isnt this engine on Range Rovers. if yes what, do you know which year?
Are you looking for parts or are you just asking out of interest? If it's parts then let us know what your problem is or what you're looking for and we can try to help.
If it's just for the hell of it many of the answers above are correct - take your pick.

Chassis 33

6,194 posts

313 months

Wednesday 15th April 2009
quotequote all
spend said:
Tyre_Tread said:
It was originally a Buick design that thye dropped and Rover bought the rights and modified it substantially including the manufacturing process.
..but originally rumoured to have been 'liberated' as reparation from Munich in the late 40's.;)
I've heard that story too; but I've never seen any evidence to back it up.
Regards
Iain

spend

12,581 posts

282 months

Wednesday 15th April 2009
quotequote all
dmmancini said:
I never heard the reparation story, it was designed by GM bu proved too small for the giant US cars
You obviously never heard the stories of the giants being unable to work with aloomium instead of eyeron either hehe (They do have a lot of V6's based on same platform even now...)

Tyre_Tread

10,697 posts

247 months

Wednesday 15th April 2009
quotequote all
dmmancini said:
I never heard the reparation story, it was designed by GM bu proved too small for the giant US cars, was also used in marine applications in the US and the rights were sold to BL. In any case the 400 looks identical to that in my 3.9 Range Rover Classic. The 4.0 Range Rover as used in the p38 model, (1995-2002), was based on the same engine but very different again as the castings were improved and strengthened with external webbing. I suspect the same engines were used in Discovery and and the rare V8 Defender model.
They all use the same engine with just minir modifications, developments and improvements.

Later models have the aperture for the mechanical fuel pump blanked off when cast and the rear crankcase breather at the top left is closed off. The later ones, as you rightly say had better strength due to the webs. There are many changes over the years but the basic design casting is common to all.

My 3.5 litre Rover now actually is a 3.9 that is a 4 litre lump from a Chimaera with different cam and pistons to give it different characteristics.

Simon Says

19,466 posts

252 months

Wednesday 15th April 2009
quotequote all
I have yet to see one TVR RV8(well Chim/Griff)with standard heads,standard valve sizes maybe on the 4.0 wink but the exhaust ports have always been ground out compared to the standard non TVR fitted RV8(lot smaller)either that or i have seen many with modded heads and by different owners i don't believe that's the case scratchchin Daz they must have been stripped by TVR for the fitting of the cam,valve springs etc and the notched pistons for the HC 4.0,obviously the 5.0 motor had a major build but that is a totally different kettle of fish biggrin



Edited by Simon Says on Wednesday 15th April 12:11

Tyre_Tread

10,697 posts

247 months

Wednesday 15th April 2009
quotequote all
Of course all of the engines were "breathed on " by TVR. They were bored, tuned and adapted to suit the spec but basically the same blocks and heads.