Trumpet base gasket?
Discussion
I have a high pitched........ahem......weeeeeeeeeeeeeeeeee coming from the rear of the plenum on the over-run which started a couple of weeks ago and is now audible at tick over. Whipped the plenum off and resealed it with blue gasket glue. However its still doing it so I suspect a leak between the trumpet base and inlet manifold. Engine is running fine so it can only be a tiny leak.
Could anyone tell me if it's a gasket at this joint or more gasket glue?
TIA.
Paul.
Could anyone tell me if it's a gasket at this joint or more gasket glue?
TIA.
Paul.
Hi Paul,
There's no gasket at this point - just a good bit of blue hylomar.
However if you are going to remove Inlet Manifold / Trumpet Base, get yourself one of these trumpet base gaskets:
http://www.sc-power.co.uk/SC%20Power%20Engine%20Mo...
Did mine the other day and Plenum is much cooler to the touch plus helps seal and gaps and eliminate possible noises!
Ryan
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


