four wheel alignment
four wheel alignment
Author
Discussion

daz the plumber

Original Poster:

14,997 posts

262 months

Thursday 16th April 2009
quotequote all
just been to a local four wheel alignment centre, they only have the griffith settings ,not sure if its the same . can any one give me a link to the settings .

locodude

510 posts

226 months

Thursday 16th April 2009
quotequote all
Scroll near to bottom of page, suspension settings are there, called running gear settings http://www.parkersteve.dsl.pipex.com/chimaeraparts...

Edited by locodude on Thursday 16th April 19:28

daz the plumber

Original Poster:

14,997 posts

262 months

Thursday 16th April 2009
quotequote all
thanks, the settings are a bit vague

locodude

510 posts

226 months

Thursday 16th April 2009
quotequote all
daz the plumber said:
thanks, the settings are a bit vague
Vague?

daz the plumber

Original Poster:

14,997 posts

262 months

Thursday 16th April 2009
quotequote all
does not give exact settings which tvr recommended.

locodude

510 posts

226 months

Thursday 16th April 2009
quotequote all
The only measurement that's not exact is the camber. TVR recommend a setting between -30' and -1 degree. As long as both wheels on the same axle are set the same I don't think you'll have a problem especially on a road car. I think considered opinion has it to set the camber at -3/4 of a degree ish. To actually set them all identical is difficult. I've never seen it. If you get them within 5' of each other you'll have done well.

edited to make more sense.................hopefullyfrown

Edited by locodude on Friday 17th April 10:27