Chim working again!!
Discussion
That is the Chim fixed after my breakdown on the M74 on Saturday.
The fuel pump stopped priming!!!
Thoughts were
1: Immobilser mucking around.
2: Relays knacked
3: Dirty Connectors
4: Knacked fuel pump.
After being recovered home, I found out that it was the dirty spade connectors going to the fuel pump, which were covered in crap. Cleaned them up and hey presto.
Looking forward to run to Chatsworth on Sunday now.
Richard
The fuel pump stopped priming!!!
Thoughts were
1: Immobilser mucking around.
2: Relays knacked
3: Dirty Connectors
4: Knacked fuel pump.
After being recovered home, I found out that it was the dirty spade connectors going to the fuel pump, which were covered in crap. Cleaned them up and hey presto.
Looking forward to run to Chatsworth on Sunday now.
Richard
Well done Richard, was the rubber boot still there or was it just a spade connector?
My rubber boot was missing so obviously got all the crap from the road. The cable had rotted away a good three inches back from the connector so ended up cutting cable until shiny copper was visible.
Then fitted new spade with boot and has been fine the last tree years.
Hope to be at Chatsworth too, lets hope the weather is as good as it has been the last couple of weeks.
Cheers.
Paul.
My rubber boot was missing so obviously got all the crap from the road. The cable had rotted away a good three inches back from the connector so ended up cutting cable until shiny copper was visible.
Then fitted new spade with boot and has been fine the last tree years.
Hope to be at Chatsworth too, lets hope the weather is as good as it has been the last couple of weeks.
Cheers.
Paul.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



