Engine rebuild - torque settings
Discussion
Hi
Might anyone have some information to help with torque settings for 5.0 litre RV8 torque settings?
I have taken the inlet manifold and plenum off to work on rocker replacement (see Dreaded tick tread) and am rebuilding at present. The figures I am after are the settings for the inlet manifold , the plenum bottom plate and the plenum top.
Advice would be good thanks.
Phil.
Might anyone have some information to help with torque settings for 5.0 litre RV8 torque settings?
I have taken the inlet manifold and plenum off to work on rocker replacement (see Dreaded tick tread) and am rebuilding at present. The figures I am after are the settings for the inlet manifold , the plenum bottom plate and the plenum top.
Advice would be good thanks.
Phil.
You can down load the engine manual for free here :
http://www.landrover.ee/est/varia/downloads/engine...
http://www.landrover.ee/est/varia/downloads/engine...
Also Quinny gives a good write up of rebulding a 5l here http://www.thegriffithpages.com/modifications/engi...
Regards
Iain
Regards
Iain
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


