Help me with my shocks please
Discussion
My rear tyres are catching on the body on some B road bumps.
Ive just fitted some Gaz gold shocks to the rear,(the fronts go on tomorrow).
Ive got 25mm of thread showing below the bottom lock nut and the outriggers at the back corners are 150mm off the ground.
Ive wound the setting to 8 clicks clockwise.
What am I doing wrong, and any suggestions for the front please before I fit them tomorrow.
Ive got 17'' wheels all round if that makes a difference.
Ive just fitted some Gaz gold shocks to the rear,(the fronts go on tomorrow).
Ive got 25mm of thread showing below the bottom lock nut and the outriggers at the back corners are 150mm off the ground.
Ive wound the setting to 8 clicks clockwise.
What am I doing wrong, and any suggestions for the front please before I fit them tomorrow.
Ive got 17'' wheels all round if that makes a difference.
i have the standard gaz shockers .i also have 17" wheels .i set the rear ride height at 150mm from the underneath of the triangular plate to the floor .i jacked the car up when winding them to the height then when the car is on the floor twist it up half a turn , when under tension .i have mine set 18 clicks from soft and it`s perfect , they seem to of get better with age .
When setting the height you have to keep checking outrigger to ground mesurement as the springs need to settle after you have jacked the car up. Also worth checking you have the right shock and springs on the rear as the rear I think the rear spring should be harder. Also I think the rear should be higher than the front by about 10-15mm do a search on here.
If you jack it up to do the ride height, you need to roll car up & down to settle the suspension. I would only do that for significant changes. Ramps and a level across them allow you to work under the car whilst the suspension is loaded which is better for fine adjustments IMHO. A proper C spanner to turn the platforms is essential, a good bounce & roll before final check works for me. It's not complicated if you just follow some simple procedures, but if you just jack it, set it you may well find its completely different 10 yards down the drive 

chrispitman said:
When setting the height you have to keep checking outrigger to ground mesurement as the springs need to settle after you have jacked the car up. Also worth checking you have the right shock and springs on the rear as the rear I think the rear spring should be harder. Also I think the rear should be higher than the front by about 10-15mm do a search on here.
I thought the springs should be stiffer on the front 400lbV8 Animal said:
chrispitman said:
When setting the height you have to keep checking outrigger to ground mesurement as the springs need to settle after you have jacked the car up. Also worth checking you have the right shock and springs on the rear as the rear I think the rear spring should be harder. Also I think the rear should be higher than the front by about 10-15mm do a search on here.
I thought the springs should be stiffer on the front 400lbIts me that doesnt know what he's doing.

sapper said:
V8 Animal said:
chrispitman said:
When setting the height you have to keep checking outrigger to ground mesurement as the springs need to settle after you have jacked the car up. Also worth checking you have the right shock and springs on the rear as the rear I think the rear spring should be harder. Also I think the rear should be higher than the front by about 10-15mm do a search on here.
I thought the springs should be stiffer on the front 400lbIts me that doesnt know what he's doing.

I would start off at 42mm from last thread to underside of lockring on the rear and 25mm on the front. about 7-8 clicks from soft on the rear is about right and 5-6 on the front works for me.
Once its all settled down you can arrive at a ride height that works for you.
Oh and yes, 400lb front and 325lb rear.
Edited by Ab Shocks on Friday 24th April 20:47
Ab Shocks said:
sapper said:
V8 Animal said:
chrispitman said:
When setting the height you have to keep checking outrigger to ground mesurement as the springs need to settle after you have jacked the car up. Also worth checking you have the right shock and springs on the rear as the rear I think the rear spring should be harder. Also I think the rear should be higher than the front by about 10-15mm do a search on here.
I thought the springs should be stiffer on the front 400lbIts me that doesnt know what he's doing.

I would start off at 42mm from last thread to underside of lockring on the rear and 25mm on the front. about 7-8 clicks from soft on the rear is about right and 5-6 on the front works for me.
Once its all settled down you can arrive at a ride height that works for you.
Oh and yes, 400lb front and 325lb rear.
Edited by Ab Shocks on Friday 24th April 20:47
Ill go to those settings in the morning and test it out on the way to chatsworth.
If your tyres are catching on the arches, it is worthwhile having your camber angles checked.
There is very little play inbetween tyre and arch.
On mine, with different wheels,(18"), the tyres were rubbing when set up to the correct camber angles.
We settled for an additional plus 1/2 degree on the rear and plus 1 degree on the front, (car gets used a fair bit on the track), problem solved.
HCM.
There is very little play inbetween tyre and arch.
On mine, with different wheels,(18"), the tyres were rubbing when set up to the correct camber angles.
We settled for an additional plus 1/2 degree on the rear and plus 1 degree on the front, (car gets used a fair bit on the track), problem solved.
HCM.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff




