Discussion
Hi all,
was reading Spend's post over in the Griff forum about earthing points. Was looking for earthing point info for the Chim - assume they must be fairly similar but wanted confirmation.
Here's Spend's description of locations below:
Also can someone elaborate on the footwell/transmission tunnel Earths - How easy to get to and does anything need to come off/out.
Cheers,
Ryan
was reading Spend's post over in the Griff forum about earthing points. Was looking for earthing point info for the Chim - assume they must be fairly similar but wanted confirmation.
Here's Spend's description of locations below:
spend said:
Engine earths for sensors are at the back of the cylinder head behind no 7 pot. I think these go back to the ecu BTW.
Battery to chassis is under trans tunnel, dash / fusebox earths come from there or off the steering column.
Front loom earths from the chassis bolts under the rad.
Rear loom earths from chassis bolts under the petrol tank.
Are they all in a similar place on the Chim?Battery to chassis is under trans tunnel, dash / fusebox earths come from there or off the steering column.
Front loom earths from the chassis bolts under the rad.
Rear loom earths from chassis bolts under the petrol tank.
Also can someone elaborate on the footwell/transmission tunnel Earths - How easy to get to and does anything need to come off/out.
Cheers,
Ryan
Most of that sound right for the chimera, main point are front by rad, centre console and behind tank in boot. there is also and eart in the front driver wheel arch on the outrigger diagonal. The center console push the carpet in when it is sandwiched between the top dash and transmission tunnel about 6" back from the fron you should feel a soft spot as there is a cutout in the fibre glass when the bolt is, you have to pull the carpet back which is probably glued and trapped between the dash and transmisson tunnel.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


